LED Tape

Level up your lighting game with our range of high-quality, simple to install LED tape. Whether you’re looking for stylish, minimal lighting for your living room, or colour-changing LED tape lights for your bedroom, Simple Lighting have you covered.

We supply LED tape strip lights in a wide variety of colours and brightnesses, suitable for both domestic and commercial use. We sell indoor LED tape if you’re looking to create an eye-catching window display for your shop, as well as water-resistant IP65-rated LED tape which can be used in bathrooms and outdoor areas. LED tape is highly versatile, and with many styles coming with self-adhesive 3M strips, you can have your new lighting strips up in no time at all!

You can also take advantage of our free LED tape cutting service, where we cut LED light strips to your exact length requirements and solder wires onto the end of the strip. With our bespoke service, you’ll never have to buy more than you need and can match your LED light strips perfectly to your space.

Shop our full range of LED tape below, and don’t forget to check out our full range of LED strip lighting and accessories. We stock LED drivers, LED controllers, and aluminium profiles to help install and protect your LED tape light strips.

What is LED tape?

LED tape is a thin, flexible circuit board populated with small, single LEDs. These circuit boards, or LED tape strips, normally come with a self-adhesive backing, so they can be attached to walls, ceilings, or other surfaces.

This creates an attractive, and highly customisable lighting effect that can be used in homes, gardens, and businesses.

Can LED tape be cut?

Yes, LED tape can be cut, as long as it is only cut along the marked lines on the lighting strip. This ensures that the circuit can still be completed, and the LED lights will continue to work.

Each LED lighting strip is made up of multiple circuits, so they can be cut at specific intervals and trimmed down to best fit the space you’d like to install them in. You can also rejoin two cut pieces of LED tape by using a connector. Or, if you’re a little more handy, you can connect two lengths of LED tape using solder and a soldering iron.

How do you install LED tape?

Once your LED tape is cut to the right length, you will need to purchase an LED driver or another suitable electrical source to power your new lights. Once you have your power source, and a connector to link up the LED tape strip to the source you should:

  • Wash the surface you plan to affix them to with warm water, then wipe it dry.
  • Mark out exactly where your LED light strip will be with a pencil or piece of chalk.
  • Peel the adhesive backing away from your LED tape, and press it against the wall, following the marks you have made.
  • Attach the power supply, and affix this to the wall or surface too if needed.

You can also use aluminium profiles to install your LED tape. These metal brackets can be screwed directly to your desired surface, protecting your LED tape and insuring against the adhesive losing its stickiness over time.

For more tips and advice for choosing, installing, and using your LED tape lights, feel free to visit our expert guide – LED Light Strips: All You Need To Know. Or, if you’d like to chat to one of our dedicated lighting team, feel free to reach out via our contact page.

View as Grid List

Items 1-15 of 26

Set Descending Direction
Page
per page
Copyright © 2009 - 2021 Simple Lighting. All Rights Reserved