LED Tape, Cool White IP65 Waterproof
- Cut To Measure - personalised to your requirements
- We solder a 2m long wire onto the end of each LED Strip for you
- Available in any length between 0.05m to 10m long (50mm to 10,000mm)
- 5 Year Warranty
- Ultra Bright - high lumens per metre
- Dimmable through remote control, mains wall dimmer or through our APP & smart speaker (Sold Separately)
All-around 12v LED strip lights for any type of application!
This Cool White, high-power, 12v LED strip light, is ultra-bright and looks incredible once installed. The cool white colour given off is ideal as an alternative to the more traditional lighting options for kitchens and bathrooms. It is a very clean white, much lighter than the warm white/yellowish glow that halogen lighting creates. Our 12v LED strip lights give more than enough light to illuminate a kitchen work surface. These 12v LED strip lights are dust-proof, splash-proof and suitable for safe use in zone 1 of your bathroom, cleaning and maintenance is incredibly easy, simply run a damp cloth over the strip.
This LED Tape is one of our best sellers. We supply thousands of metres, nationwide, every month to homeowners and big brands alike, such as Frankie & Benny's, Matalan, Adidas and Subway.
Our strip lights use 3M branded self-adhesive on the rear, so you simply peel off the cover and stick on to almost any surface. It's cuttable to the nearest 50mm and we will cut to size for FREE & solder on a 2-metre cable for all of our customers, meaning you only pay for what you need. Please remember to round down to the nearest 50mm when you place your order!
This 12v LED strip light is extremely bright & ideal for use in areas where a waterproof product is needed, such as a bathroom, outdoors and other areas where it may be exposed to water or moisture. Please note though that it is NOT submergible.
- Dimmable – When used with a product from our range of remote controllers and wall controllers.
- Commercial Grade – With a great 5-year warranty.
- Easy to conceal – Only 3mm deep and sticks to almost any surface.
- Bespoke cutting service – Let us make it Simple! for you, by cutting to your required length and soldering a 2-metre cable to the end.
- IP65 - Suitable for use in zone 1 of the bathroom and other damp or steamy areas.
- 12v DC - Requires LED driver
- 5-watt power per metre
- 618 lumens per metre
- 120° beam angle
- 60 LEDs per metre
- Cuttable every 50mm
- A maximum continuous length of 10 metres
- Uses branded 3m self-adhesive
LED Driver Information
We have a large range of drivers that can be used with our Waterproof Tape.
If you do not need your 12v LED strip lights to be dimmed, or if you are going to use one of our range of remote controls or wall controllers then you will need to purchase one of our standard LED drivers.
If you plan to use a standard, traditional wall dimmer you will need to purchase one of our dimmable LED drivers. (Also make sure that the dimmer is LED compatible.)
This 12v LED strip light is excluded from our usual return policy, as it is personalised to your personal requirements (please refer to our terms and conditions for more information). We do, however, offer a 5-year warranty on it in case of faults.
If you need any help or guidance, you can contact us by calling 0333 443 2465.
|Average Life (Hours)||50,000|
|LED Strip Type||Single Colour|
|LED Colour||Cool White|
|Input Voltage||12v DC|
|Cable Length||2 Metres|