LED Tape, Warm White 10w P/M 3000K
- Cut To Measure - personalised to your requirements.
- We solder a 2m long wire onto the end of each LED Strip for you.
- Available in any length between 0.1m to 10m long (100mm to 10,000mm).
- Ultra Bright - high lumens per metre with 5-year warranty
- Dimmable through remote control, mains wall dimmer or through our APP & smart speaker (Sold Separately).
- Order online or call 0333 443 2465
Outstanding Brightness! 1198 Lumens per Metre
LED lighting is one of the best discoveries in the lighting industry. It is cost-effective, low maintenance, long-lasting, and eco-friendly. However, on top of all those, it is efficient! LEDs can convert most of the power it consumes into light with very minimal becoming waste (heat). As a result, it can sufficiently brighten your space without forcing you to pay a high price!
Powered by that same technology, this LED strip light only requires 10w of power per metre to produce 1198 lumens maximum brightness with a 120-degree beam angle. Also, it has an extended life expectancy of 50,000 hours which is ten times longer than a non-LED light fixture!
12v DC - LED Driver Required
This is a 12v DC LED strip light, so it requires a 12v DC LED driver to work. But what about the wattage? What should you get? To determine the appropriate driver for your application, you must identify the total length of strip lights you will use and their wattage per metre. If you’ll use 2 metres and this LED strip light is 10w per metre, multiply them, and you’ll get 20w. Then round this up to the nearest available driver, which in this case would be 20w.
Kindly note that you may need more than one LED driver for your project. However, as long as it’s not overloaded, you can connect as many strips of LED tapes as you require to the same driver.
Diverse Control Options
You can control this LED strip light in many ways. The only thing you need is to get the appropriate LED driver to ensure that it will work.
You'll need a standard LED driver if you want to use it with a remote control or one of our glass plate controllers. Alternatively, if you prefer a traditional wall dimmer, one where you twist the knob, you must purchase a dimmable LED driver. Just ensure the wall dimmer is LED-compatible to avoid flickering or malfunctions. Also, even if you don’t want to dim this LED strip light (since it’s dimmable), you will still need a standard LED driver to make it work. It’s low-voltage, so you cannot wire it directly to the mains circuit.
Cut to Measure
We offer a free bespoke cutting service when you purchase this LED strip light! Just let us know the measurements you need, and we’ll prepare them accordingly. Besides that, we’ll also solder a 2-metre cable at the end of the strip, so when it arrives, you can skip all the tedious processes and start with the installation!
This particular LED tape can be cut in increments of 25mm, so be sure to remember to round your measurement down to the nearest 25mm when placing your order. The maximum length of a single strip of this LED tape is an impressive 14 metres! Also, please be informed that this is sold per metre on our website. When you input 2, you’ll get a continuous two meters, and if you put 5, you’ll get five metres.
Warm White Light, 3000K
This LED strip light can produce a warm white LED colour (3000K). If cool white light has a crisp bluish tone and natural white light has no hints of yellow or blue, warm white light has a yellowish glow that resembles an old incandescent bulb! It’s suitable for ambient lighting because its warmth can create a cosy and inviting atmosphere.
This warm white LED strip has thousands of uses, limited by only your imagination! It’s practical and decorative and is perfect for lighting under your kitchen cupboards, ceilings, shelves, display cases and hallways. It’s also ideal for traditionally hard-to-light areas, such as the loft, cellar, and garage. This tape is also suitable for various commercial uses, from bars to hotels and restaurants.
Quick and Effortless to Install
Installation is not an issue with this LED strip light. You only need to prepare the compatible driver and controller and review the installation instruction. Also, guarantee that you clean the surface where you’ll mount the strips first so they will adhere properly.
After all the preparations, peel the cover from the 3M adhesive backing and stick it to your chosen, dust-free surface! When it comes to wiring and other connections, read the installation manual to be guided accordingly. If you’re not confident in DIY-ing the installation, it’s better to call for an electrician. That way, you’re assured that your strip lights are mounted correctly, and you are free from any risks!
|Quick Order Code||STRIP-IP20-10W-WW|
|Average Life (Hours)||50,000|
|LED Strip Type||Single Colour|
|LED Colour||Warm White 3000K|
|Input Voltage||12v DC|
|Cable Length||2 Metres|