Our Warehouse Is Still Operating Normally. Click Here For Info

0151 375 92100333 443 2465Order & Advice line

10w IP65 White Dimmable LED Fire Rated Downlight


200 - 240V AC Voltage
800lms Lumens
30,000 Hours Lifespan
10w Wattage

Was £19.95

Special Price: £13.85

Save £6.10

Choose your product:

Need Help Choosing?

Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
10w IP65 White Dimmable LED Fire Rated Downlight
Product Description

Available in warm white or natural white our 10w led fire rated downlight is great value for money.

It comes complete with a quick connection block for easy installation along with an LED Driver mounted on a flexible arm so that it can easily slip into the cutout. 

A key feature is the IC Cap along with the relatively short can design for the less deep ceiling voids.

The IC cap clips on top of the downlight and means that you can run loft insulation directly over the top of the downlight whereas cheaper downlights on the market don't allow for this, instead you need to cut around the downlight. 

The IC cap is removable and not required, so if you have a limited ceiling void you can just clip it off.


  • Lumens - 800lms
  • Diameter - 82mm
  • Cutout hole - 72mm
  • Depth - Without IC Cap - 53mm
  • Depth - With IC Cap - 80mm
  • IP65 - White bezel
  • Beam Angle - 38 degrees
  • LED Colour - Natural White or Warm White
  • LED Kelvin - 4000K or 3000K 
  • Product Range Premium Range
  • Type of Fitting Shower/IP65 Downlight
  • Diameter 82mm The measurement across the face of the light source. Normally in mm unless other stated.
  • Depth 53-80mm
  • Cutout Size 72mm The size of the cutout required to install the light. This is normally measure in mm unless otherwise stated.
  • Beam Angle 38 degrees Refers to the degree of width in which the light illuminates from the source.
  • Voltage 200 - 240V AC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Average Hours 30,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Delivery Time Available Next Day if Ordered Before 3pm
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lumens 800lms A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 10w The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • CRI 83 Stands for colour rendering index. This is a measure of the ability of the light source to reproduce colours of different objects positively comparing with an ideal or a natural light source.
  • Bulb included Yes
  • Colour Temperature 3000K WW/ 4000 Colour temperature in K

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information

My Basket Continue Shopping

You have no items in your shopping basket.

Continue Shopping