0 items - £0.00

0151 375 92100333 443 2465Order & Advice line

Call
Basket

Fire Rated Downlight GU10 Fixed - Brushed Chrome Finish

SKU: FGFS-1

240V Voltage

Was £9.95

Special Price: £3.95

Save £6.00

Choose your product:

Need Help Choosing?

Was £9.95

Special Price: £3.95

Save £6.00

Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
Fire Rated Downlight GU10 Fixed - Brushed Chrome Finish
Product Description

Fire Rated Downlight GU10 Fixed - Brushed Chrome Finish

Our Brushed Chrome Finish Fire Rated Downlights are produced to the highest quality and meet all relevant BS standards, including;

  • Tested to 90 minutes protection
  • Tested and assessed to BS 476, parts 21, 22 & 23
  • Part "E" compliant (acoustics)

This light is GU10 base, and is 230v, meaning it is suitable for mains power, and does not require a transformer to run. 

These Downlights are fully compatible with the latest LED GU10 Bulbs, we are specialists in LED technology and offer LED Bulbs from only £1.99 which you can add to your order when Adding to Basket.

Your options are as follows:

  • 5w GU10 LED - 320 Lumens - Replaces a standard 50w Halogen Bulb.
  • 5w Dimmable GU10 LED - 350 Lumens - Replaces a standard 50w Halogen Bulb.
  • 7w GU10 LED - 530 Lumens - Replaces a 60-70w Halogen Bulb.

If you would prefer to buy this downlight without a GU10 LED or select your own GU10 select that No Bulb is required when adding to basket and visit our GU10 LED Bulb Page.

Product Features;

  • 240v Mains
  • IP20 Rated
  • Steel Can
  • Meets all relevant BS Regulations
  • Independently tested to conform to BS Standards by IFC Group

This fitting is also available in White and Polished Chrome.

Specifications
  • Product Range Best Value Range
  • Type of Fitting Fixed Downlight
  • SKU FGFS-1
  • Voltage 240V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 133mm (full length) The physical length of the product
  • Diameter 85mm The measurement across the face of the light source. Normally in mm unless other stated.
  • Cutout Size 65mm The size of the cutout required to install the light. This is normally measure in mm unless otherwise stated.
  • Delivery Time Available Next Day if Ordered Before 3pm
  • Finish Brushed Chrome The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • IP Rating IP20 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lamp Base GU10 Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Maximum Load 35w Flammable Surfaces / 50w Non-Flammable Surfaces The maximum electrical load that the product is manufactured to accept. Normally measured in Watts or AMP. EG, if you have a product which is 150w and lights which are 50w each then 3 x 50w = 150w which is the maximum load.
Here are some answers to frequently asked questions asked by other customers. Alternatively, you can click Ask a Question and we will get back to you asap.

Whats the cut out size please?

Does this require a transformer?

What type of bulb is needed for this?

Are these lights covetable with insulation

What does these lights are not covetable with loft insulation mean? We have loft insulation above our bathroom where these lights would be fitted? Thanks

are these fittings compatible with the Philips HUE GU10 bulb? These are longer than standard GU10.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information

X

Ask a question: