Limited Time Only - Get 15% Off All Orders, Use Code BRIGHT15 (excl trade discount)

Fire Rated Downlight, GU10, Fixed - Polished Chrome Bezel, With Quick Connectors

Only %1 left
Input Voltage
Input Voltage
3 Years
IP Rating
IP Rating
In stock
  • New & improved design, comes with a slim profile 3mm bezel.
  • Made for LED, now insulation coverable (max wattage 7w GU10 LED)
  • Now suitable for I-Joist & Solid Joist ceilings
  • Screwless / Toolless install, comes with loop in / out quick connectors for a speedy installation
  • Dimensions: 85mm diameter with a cutout hole size of between 65-75mm
  • 3 Year Warranty
£3.29 £3.95 Was £9.95 Save £6.00
Fire Rated Downlight, GU10, Fixed - Polished Chrome Bezel, With Quick Connectors
£3.29 £3.95 Was £9.95 Save £6.00
Linkable lights - natural white or warm white Linkable lights - natural white or warm white

Slim Polished Chrome Bezel

It’s more challenging to constantly update the styling of your interior if you have ceiling lights that only identify with a specific theme. If you’re a homeowner who often feels inspired to change things up, opting for a simple ceiling fixture will enable you to be more flexible with your designs!

So, choosing this LED downlight may be your best bet instead of an elaborate ceiling light! It has a slender circular bezel that is muted but elegant. Also, its stunning polished chrome finish goes well with any interior design, be it classic, modern, or something in between! Now, you can style your home however you want without being restricted by the existing lighting fixtures you have!

Insulation Coverable When Partnered With a LED Lamp (Max 7w Power)

Before adding insulation to your downlights, always check the manufacturer’s instructions. Not all fixtures are allowed to be covered with insulation, so unless stated otherwise, you should not take the risk. What you install to protect your home may be a hazard if you don’t do the correct procedure. 

As for this LED downlight, its insulation is coverable when partnered with an LED lamp. However, you can cover the fitting if the GU10 bulb has a maximum of 7w power. 

If the bulb is rated more than 7w, you can still use it with this downlight but please do not cover the fitting with insulation.

Linkable lights - available in five different lengths Linkable lights - available in five different lengths
Linkable lights - ultra slimline design Linkable lights - ultra slimline design

Quick & Easy Installation, Loop In and Out Quick Connectors

The more complicated an installation is, the more time and money you’ll have to spend. So, if you’re looking for lighting fixtures that are quick and easy to install, you need to get this LED downlight!

One of the reasons why electricians love our downlights is because of the simplicity of the mounting process. It doesn’t have to take them long to finish wiring a few fittings. With this fire-rated downlight, it's the same! It has a screwless terminal and large connectors, allowing for easy loop-in and out connection. Aside from that, it’s mains powered, so you don’t need to add a transformer to make it work! Just wire the fixture directly to the mains circuit, add a bulb and you’re all set.

Fire-Rated, Ideal for Solid Joist & I-Joist Ceilings

Are you looking for lighting fixtures with adequate fire protection? If so, your search is over because this LED downlight is all you need! It’s fire-rated to 90 minutes of protection, meaning the holes you cut to install your fixtures are resealed, and your ceiling is reinforced to extend the time when the fire may spread. 

In addition, it’s ideal for solid joists and I-joist ceilings, giving you adequate fire defence! With this, you and your family will have more time to escape, and the damage to your home’s structure can be minimised. 

You see, cutting a hole in your ceiling weakens its fire integrity, and regular downlights are not enough to reseal the hole. Only fire-rated fittings can guarantee their restoration because of their intumescent pad. 

Linkable lights - linkable lights Linkable lights - linkable lights
Linkable lights - three year warranty Linkable lights - three year warranty


Whether you’re doing the installation yourself or hiring an electrician to do it for you, knowing the dimensions of your fixture is necessary. Recessed lighting units are sensitive to measurements because if you don’t follow them accurately, your lights may end up protruding or falling off your ceiling. Both scenarios are not something you want to end up with!

So, take note; this LED downlight is 112mm tall with an 85mm diameter and requires a 70mm cut-out hole. Make sure to get this right so your fixtures sit perfectly flush against your ceiling! Also, before doing any trims, remember to plot and mark first! It’s easier and less time-consuming cleaning those than patching holes!

Used with a GU10 Bulb

This LED downlight is designed with a GU10 lamp holder, so you can pair it with any GU10 bulb. However, since it’s dimmable, using a dimmable GU10 bulb with a compatible dimmer switch is better since it’ll allow you to utilise the dimming function!

Regarding the GU10 bulb, it’s available in three LED colours, including cool, natural and warm white light. Cool and natural white light are both ideal for task lighting. The only difference between the two is cool white has a crisp bluish tone, whereas natural white is like a cloudless sunny day without a hit of blue or yellow. Alternatively, warm white light is used for ambient lighting because its yellowish shade helps create a relaxing and cosy atmosphere!

Linkable lights - beautifully bright LED lights Linkable lights - beautifully bright LED lights
More Information
Quick Order Code FR-GU10-K-CH
Downlight Type Fixed
Base GU10
Height 112mm
Diameter 85mm
Dimmable Dimmable
Input Voltage 220-240v
Warranty 3 Years
IP Rating IP20
Cut Out Hole 65-75mm
Finish Polished Chrome
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved