IP65 Shower Fixed Fire Rated Downlight - Polished Chrome
This fixed IP65 fire-rated downlight is perfect for use in the bathroom (Zone 1) meaning that it can be installed in the ceiling directly above the shower or bath completely safely as it is sealed enough to protect against splashes & water ingress projected from a nozzle (like the shower). It's also ideal for use in dusty areas like workshops. Being constructed of die-cast aluminium, you can be assured that your lights won't rust or tarnish.
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
The beautiful polished chrome finish will look great in modern areas. It's also dimmable when used with a dimmable GU10 LED bulb, which is a bonus in the bathroom as you can turn the brightness up when you need task lighting & turned down when you want ambient lighting for relaxing in the bath.
One of the reasons this mains powered fire-rated shower downlight is so popular is its completely screwless installation. It has a large loop-in/loop-out terminal block with push-fit connectors & multiple downlights can be wired in series instead of each downlight being wired back to one mains point.
There is no bulb included with this downlight because everybody's requirements are different - you can add a 5w GU10 LED bulb from the drop-down bulb menu above though, there are a variety of colours and dimming options to choose from.
It's fire rated to 90 minutes protection and conforms to all British Standards that are relevant. Tested by TUV.
The length of this IP65 fire-rated downlight is 120mm (including the push-fit terminal), the diameter is 85mm & the size of the ceiling cut-out you will need to install it is 75mm.
We give a 5-year warranty on this downlight & 2-year warranty on any bulbs you choose to add.
| Downlight Type | Fixed |
|---|---|
| Base | GU10 |
| Height | 120mm |
| Diameter | 85mm |
| Dimmable | Dimmable |
| Input Voltage | 220-240v |
| Warranty | 5 Years |
| IP Rating | IP65 |
| Cut Out Hole | 75mm |
| Finish | Polished Chrome |
For delivery or returns information, please refer to the page below.
