0 items - £0.00

01516477419 Order & Advice line

Don't Miss Out on This Fab Discount
Call
Basket

Multi Pack 10 Fire Rated Downlights - Brushed Chrome

SKU: FGFS-10PKBC

240V Voltage

Was £39.50

Special Price: £35.50

Save £4.00

Choose your product:

Need Help Choosing?

warm white led

Warm White

Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.

natural white led

Natural White

Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.

cool white led

Cool White

Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.

Close

Was £39.50

Special Price: £35.50

Save £4.00

Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs
Multi Pack 10 Fire Rated Downlights - Brushed Chrome
Product Description

This 10 multi-pack of fire-rated downlights is produced to the highest quality and also meets all relevant British Safety (BS) standards, including:

  • Tested to 90 minutes’ protection
  • Tested and assessed to BS 476, parts 21, 22 & 23
  • Part "E" compliant (acoustics)
  • This light is a GU10 base and is 230v, meaning it is suitable for mains power. It does not require a transformer to run. 

Above you have the option to select a 10 pack of LED bulbs in either:

  • 5w Cool White GU10 LED Bulb – 320 Lumens - Non Dimmable
  • 5w Warm White GU10 LED Bulb – 320 Lumens - Non Dimmable
  • 5w Cool White GU10 Wide Beam - 360 Lumens - Dimmable
  • 5w Warm White GU10 Wide Beam - 340 Lumens - Dimmable

Product Features:

  • 240v Mains
  • IP20 Rated
  • Steel Can
  • Meets all relevant BS Regulations
  • Independently tested to conform to BS Standards by IFC Group
  • This fitting is also available in White and Polished Chrome.
Specifications
  • Product Range Multi Packs
  • Type of Fitting Fixed Downlight
  • SKU FGFS-10PKBC
  • Voltage 240V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 133mm The physical length of the product
  • Diameter 85mm The measurement across the face of the light source. Normally in mm unless other stated.
  • Cutout Size 65mm The size of the cutout required to install the light. This is normally measure in mm unless otherwise stated.
  • Delivery Time Next Day Delivery if Ordered Before 3pm
  • Finish Polished Chrome The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • IP Rating IP20 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lamp Base GU10 Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Maximum Load 35w Flammable Surfaces / 50w Non-Flammable Surfaces The maximum electrical load that the product is manufactured to accept. Normally measured in Watts or AMP. EG, if you have a product which is 150w and lights which are 50w each then 3 x 50w = 150w which is the maximum load.
Here are some answers to frequently asked questions asked by other customers. Alternatively, you can click Ask a Question and we will get back to you asap.

Can I buy them separately? Need total of 12. Thanks

Are these suitable for a bathroom? If so which zones can they be used in?

Can you install them under roof insulation?

Will these take the Philips Hie GU10 bulbs? These are longer than the standard sized GU10.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information

X

Ask a question: