Blue LED Strip Lighting, Self Adhesive, 5w Per Metre
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Our Blue LED Tape is ideal for feature lighting, it’s a modern solution for both home & commercial applications. Adding some blue lighting accents to your space can give a really impressive finish to your décor. This particular LED tape is a popular choice for kitchen plinth lighting and living room cove lighting in the home & is also great for commercial installations such as in bars, clubs, restaurants and shops.
We have been supplying LED tape to our customers for many years, including big brands such as Adidas, Subway and Matalan. Our customers all over the country are enjoying the benefit of flexible, versatile lighting as well as the low cost of running LED lights.
With 60 individual LEDs per metre, this LED tape is an excellent source of illumination and ambient mood lighting.
We will cut this LED tape to your exact requirements FREE OF CHARGE and solder on and end cable to make installation simple. It is cuttable to the nearest 50mm, so when you know the length you need, simply round down to the nearest 50mm.
This tape is self-adhesive with 3M branded adhesive on the back, all you have to do is peel off the backing and stick it down wherever you would like. It will stick to most surfaces, just make sure the surface is free from any dust etc. before installation.
Features:
- Dimmable – When used with our range of remote controls & wall dimmers.
- 5-year warranty
- Only 2mm deep
- Bespoke Service – We will make installation simple for you, by cutting to your required length & adding a cable
How Do I Power This LED Tape?
We have a large range of drivers that can be used with our LED Tape. If you plan to use a traditional wall dimmer (LED compatible) you will need to purchase one of our dimmable LED drivers. If you do not need your LED tape to be dimmed or if you plan to use one of our remote controls or modern wall dimmers to control your tape, then you will need to purchase one of our standard LED drivers.
Work out the wattage of the driver you need by multiplying the wattage per metre (4.8) by the length you need in metres, then choose the closest power LED driver by rounding up.
This tape is excluded from our usual return policy, as it is personalised to your personal requirements (please refer to our terms and conditions for more information).
Average Life (Hours) | 50,000 |
---|---|
LED Strip Type | Single Colour |
IP Rating | IP20 |
LED Colour | Blue LED |
Beam Angle | 120° |
Length | Max 14m |
Lumens | 240 |
Dimmable | Dimmable |
Input Voltage | 12v DC |
Power | 5w |
Cable Length | 2 Metres |
Warranty | 5 Years |
Width | 8mm |
For delivery or returns information, please refer to the page below.