30w 12Vdc LED Power Converter With 6 Way Distributor

The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Input Voltage
Input Voltage
1 Year
In stock
  • 6-way distributor
  • 30w maximum power
  • 159mm x 57mm x 18mm
  • Tested and certified to pass all British and European standards
  • 1-year warranty
£24.99 Was £29.99 Save £5.00
Buy more, save more!
  • Buy 3 £23.50 save 6%
  • Buy 5 £22.99 save 8%
  • Buy 10 £21.60 save 14%
30w 12Vdc LED Power Converter With 6 Way Distributor
£24.99 Was £29.99 Save £5.00

The LED strip light driver you need to power your lovely LEDs

If you've been stuck with the same interior for decades, aren't you dying to change it up and add something new? The first thing you need to do to refresh your place is to switch to LED lights! Compared to fluorescent and incandescent lamps, LEDs are far better in quality, price, and durability. While some LEDs are mains powered, meaning you don't need a transformer to power them up, most have a low-voltage and need to be paired with an LED driver. That is why when you buy your LED lights, you should also get a corresponding power supply like our LED strip light driver to make them run.

Our 30w LED strip light driver is perfect for use with our extensive range of 12v LED cabinet lights and LED Tape. Just remember to use the correct driver with the right number of lights so that your LEDs will be able to live up to their expected average life. You'll see in our product descriptions the recommended number of lights for specific drivers, so make sure you read them before buying and installing.

This LED strip light driver features a 6-way distributor for quick connection to the lights, and it can be wired directly to a mains feed (On/Off Light switch), or you could plug it into a plug socket (if you wire a plug onto the end of the cable). This gives you more options on how you control your lights.

This LED strip light driver can produce a maximum of 30w power and will run a maximum of 6 lights. You can use any 12Vdc LED lights you want with this so long as it does not exceed the maximum 30w power, (eg. 6 x 5w lights = 30w.) If you go beyond, it will just ruin your lights. If you want to add more, you can always use more drivers to supply the necessary power for your lights.

We offer a 1-year warranty for this LED strip light driver so you can use it without any worries for a long time.

More Information
Quick Order Code DRV-30W-12V
Switch Type Rocker Switch
Output Voltage 12v DC
Length 159mm
Width 57mm
Height 18mm
IP Rating IP20
Dimmable Non-Dimmable
Input Voltage 220-240v
Power 30w
Warranty 1 Year
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2021 Simple Lighting. All Rights Reserved