0 items - £0.00

0151 375 92100333 443 2465Order & Advice line

Call
Basket

60 Watt LED Driver 12V

SKU: LPV-60-12TF

Various Voltage
60W Wattage
What are Lumens?

Was £90.00

Special Price: £36.00

Save £54.00

Next Day if Ordered Before 3pm

Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs

60 Watt LED Driver 12V

Click to enlarge

Product Description

This LED Driver will ensure the long life of your LED product. This is a commercial grade power supply meeting all British & European standards.

Driver capacity

Up to a total of 12m of standard single colour LED tape

Up to a total of 8m of colour changing 30 LED RGB tape

Up to a total of 4m of 60 LED RGB tape

Tech Specification

  • Dimensions of LED Driver, 162mm (L) 42.5mm (W) 32mm (D)
  • 90-265 Volt AC, suitable for worldwide markets. Including US
  • Meeting all major European & worldwide standards
  • 12v DC Output

Specifications

  • Colour Various
  • SKU LPV-60-12TF
  • Width 42.5mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage Various The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 162.5mm The physical length of the product
  • Height 32mm The overall height of the product at the tallest point.
  • Delivery Time Next Day if Ordered Before 3pm
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • IP Rating IP67 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Maximum Load 12m (LED tape) or 8m (30 LED RGB tape) or 4m (60 LED RGB tape) The maximum electrical load that the product is manufactured to accept. Normally measured in Watts or AMP. EG, if you have a product which is 150w and lights which are 50w each then 3 x 50w = 150w which is the maximum load.
  • Wattage 60W The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.

For frequently asked questions, please refer to the link below.

Help & FAQs

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information