20w 12Vdc LED Power Converter With 6 Way Distributor
- 12Vdc Rated
- 20w maximum
- 6 port
- 1m long pre-wired mains cable
- 1-year warranty
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
A LED driver to power up captivating and stunning LED lights
LED lights are gaining popularity because of their many benefits. It’s more energy-efficient and eco-friendly than fluorescent and incandescent lights. Plus, its brightness is far superior to others. So, if you plan to replace your old bulbs and enhance your home with LEDs, you should know that most of them run at a lower voltage, and you’ll need an LED light power converter to make them work. Well, you don’t have to worry because we have what you need!
Our LED light power converter has a fast fit plug-in system that allows the connection of compatible lights into a pre-wired distribution block on the 12V side of the unit. It has a 220-240v input voltage and has 6 ports. This LED light power converter can power up to 20w maximum, meaning you can light multiple LEDs in one 20w power converter as long as the total power consumption of the lights is within that limit. If you plan on using more lights and the wattage exceeds the said limit, you can always get more power converters to make them run!
Our LED light power converter has a 1-metre pre-wired mains cable. But if you find that the 1-metre cable is not enough, we have a plug and play extension cable that you can use for any single-coloured cabinet lights and LED tapes. With this, you have more freedom to place your LEDs wherever you want.
This LED light power converter is a rocker switch type, meaning you have multiple ways of switching it on and off. You can put a plug at the end of the LED power converter and plug it into a socket, or you can have the LED power converter wired directly into the mains lighting circuit and control it using a regular light switch on the wall.
We offer a 1-year warranty for this LED light power converter so you can enjoy a bright home without any worries.
| Switch Type | Rocker Switch |
|---|---|
| Output Voltage | 12v DC |
| Length | 147mm |
| Width | 44mm |
| Height | 23mm |
| IP Rating | IP20 |
| Dimmable | Non-Dimmable |
| Input Voltage | 220-240v |
| Power | 20w |
| Warranty | 1 Year |
For delivery or returns information, please refer to the page below.
