Cabinet Touch Sensor Switch Mains Voltage 230v

Input Voltage
Input Voltage
IP Rating
IP Rating
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Max 250w
3 Years
In stock

Key Features:

  • Maximum Wattage: 250w
  • Controls: LED, Halogen, Drivers/Power Supplies, Tungsten
  • Class 2
  • Sensor: IP44 Casing: IP20
  • Cable Length: 300mm (For a sensor with a 2m long cable, please check this product)
  • Fixing screws included
£13.04 £15.65 Was £29.95 Save £14.30
Buy more, save more!
  • Buy 5 £12.49 £14.99 save 4%
  • Buy 10 £11.66 £13.99 save 11%
  • Buy 20 £10.82 £12.99 save 17%
Up to 5 year guarantee on lightbulbs
Free delivery if order is over £75
Cabinet Touch Sensor Switch Mains Voltage 230v
£13.04 £15.65 Was £29.95 Save £14.30

Our mains powered sensor switch can be used with any mains powered light, it is touch-sensitive. Therefore you touch the sensor and the lights come on then touch it again and the lights go off.

It is absolutely perfect for switching your cabinet lighting on and off!

The sensor is shown in the second photo, the small metal piece which you recess into a small hole.


More Information
Input Voltage 220-240v
Width 45mm
Height 15mm
IP Rating IP44
Length 110mm
Power Max 250w
Warranty 3 Years
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved