3.4w Triangle LED Under Cabinet Light - Natural White

SKU
SY7553A/SS/NW
Average Life (Hours)
30,000
Average Life (Hours)
IP Rating
IP44
IP Rating
Beam Angle
38°
Beam Angle
A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
Lumens
283
Lumens
In stock

Our COB LED range of cabinet lights from Simple Lighting. The IP44 rated fitting is of high-quality die-cast construction which ensures excellent heat sink, and the high-quality lens intensifies the lumen output, to provide market-leading luminous efficacy from an LED cabinet light.

This light comes in a triangle shape but is also available in a round surface-mounted/recessed light.

IP44 means that the light is suitable in both kitchen and bathroom areas.

£13.99Was£16.50Save £2.51
Trustpilot
Delivery
3.4w Triangle LED Under Cabinet Light - Natural White
£13.99Was£16.50Save £2.51

This beautiful, triangle-shaped LED under cabinet light is designed to be surface mounted beneath your kitchen cupboards to illuminate your worktops from above. It's important for surface mounted lights to look attractive where they're installed as they are often visible beneath the cabinets. Boasting a massive 283 lumens of brightness while using just 3.4 watts of energy, this light is the perfect combination of energy efficiency and performance. Being IP44 rated, it's suitable for use in areas where water is present like the kitchen.

With an average lifetime of approximately 30,000 hours, this under cabinet light is going to save you money on your electricity bills for years.

An LED Driver is needed to run this product: the following are what we would recommend -

8w Watt LED Driver (Product Code SY9980B) - Runs up to 2 lights.
15 Watt LED Driver (Product Code SLG15WPOWER) - Runs up to 4 lights.
20 Watt LED Driver (Product Code SLG20WPOWER) - Runs up to 5 lights
30 Watt LED Driver (Product Code SY7715) - Runs up to 6 lights.

There are many different ways of controlling these under cabinet lights, from simply putting a plug on the end of the LED driver cable and plugging them into a plug socket, wiring them into the mains at a light switch or by using one of our remote controls, you can dim the brightness from 1-100% and turn the cabinet lights on & off. (Product Code; SLG3DIM)

It is possible to control these lights from a traditional wall dimmer. You would need to install a dimmable LED Driver instead of a standard LED driver & make sure that you're using a LED compatible wall dimmer. (Dimmable LED Driver Product Code ELED-25-12T).

This light has a cable that has to be wired back to the LED driver, it's 1.5 metres long - if this isn't enough length then we offer a simple plug and play extension cable for this Cabinet Light. Cable extensions are available in 2m and 5m. (Product Code 7183).

More Information
Cable Length 1500mm
Length 150mm
Width 126mm
Average Life (Hours) 30,000
Height 50mm
IP Rating IP44
Finish Brushed Chrome/Nickel
LED Colour Natural White
Beam Angle 38°
Lumens 283
Dimmable Dimmable
Input Voltage 12v DC
Power 3.4w
Warranty 3 Years
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2020 Simple Lighting. All Rights Reserved