Pack of 5 - No Dot Design - Surface Mounted LED Under Cabinet Light - Ultra-High Brightness & 15w Driver

Only %1 left
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Average Life (Hours)
Average Life (Hours)
IP Rating
IP Rating
Beam Angle
Beam Angle
In stock
£49.29 £59.15 Was £79.99 Save £20.84
Pack of 5 - No Dot Design - Surface Mounted LED Under Cabinet Light - Ultra-High Brightness & 15w Driver
£49.29 £59.15 Was £79.99 Save £20.84

These lights are one of our favourite products in this category! They're versatile, affordable, practical & at the forefront of LED technology. Featuring trusted, energy-saving, LEDs - these stylish, stainless steel finished lights have a specially designed, light-diffusing cover that creates an even 120° beam angle & eliminates visible LED dots and dark spots.

This means that you can now get light distribution that matches halogen lamps, but with all the energy-saving benefits of LED.

Our stylish surface-mounted lights use just 2.6w of energy per light, saving you money on your energy bills when replacing halogen lamps that consume much more energy.

Because this pack of under cabinet lights are IP44 rated, they are perfect for use in kitchens and bathrooms (zone 2) where it can become steamy and damp.

This pack comes complete with 5 individual surface-mounted, round lights & a 15w LED driver to run them, making your installation as simple as possible. The lights are 12v & the LED driver is 220v mains wireable so that they can be wired into a plug socket or light switch. You could also add a plug onto the end of the driver cable and plug it into a spare socket.

You have a choice of either Warm White colour LEDs, which give a soft yellowish light or Natural White LEDs which give you a brighter white coloured light without being harsh.

Our stunning surface-mounted lights are also available individually and in packs of 3 with a driver.

Each of these lights has a cable length of 2 metres that needs to route back to the LED driver - if this isn't enough length for your installation then we sell a simple plug and play extension cable that simply plugs into the end of the existing cable. The extension cables are available in a choice of 2m or 5m, you can click here to view them.

More Information
Cable Length 2 Metres
Average Life (Hours) 30,000
Height 16mm
IP Rating IP44
Finish Stainless Steel
Beam Angle 120°
Lumens 130
Diameter 65mm
Dimmable Non-Dimmable
Input Voltage 220-240v
Power 2.6w
Warranty 3 Years
Cut Out Hole 57mm
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved