LED Dimmer Controller and Remote - 4 Channel

Hi Tim, 

By 4 channel it is not reference to the wiring. It references the fact that one remote control can control upto 4 channels of lighting. 

Each channel needs an additional receiver. 

https://www.simplelighting.co.uk/led-dimmer-receiver/

You then programme the remote control to the channel needed.

Multiple receivers can be on the same channel also. 

Thanks

Chris

Hi Keith,

Thanks for your question.

You can use this no problem. You don't need a dimmable LED Driver.

This dimmer module sits on the low voltage side of the wiring so the remote control allows you to dim and switch on/off without any trouble. 

Its a really good addition to cabinet lighting.

You can use this driver, for 3 lights.

https://www.simplelighting.co.uk/15w-12vdc-led-power-converter/

Every new driver, EG: Driver 2, 3 etc would need one of these for it to work. 

https://www.simplelighting.co.uk/led-dimmer-receiver/

When you receive this, you will need to move the distributor from the led driver, from the driver to the dimmer module output.

If you need a wiring diagram for this, reply to this email and i will send it to you. Its really quick and easy to do.

Thanks

Chris

Hi Philip,

Plenty, you can wire as many as needed. Subject to 144 watts maximum capacity. 

Thanks
Chris