RGB LED Tape, IP65 Waterproof, 15w, 60 LEDs P/M

SKU
SLGLEDRGB60IP
Average Life (Hours)
50,000
Average Life (Hours)
IP Rating
IP65
IP Rating
Beam Angle
120°
Beam Angle
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Power
15w
Power
In stock
  • Using our remote control, select from hundreds of different LED colours.
  • Cut To Measure - personalised to your requirements.
  • We solder a 1m long wire onto the end of each LED Strip for you.
  • Available in any length between 0.1m to 10m long (100mm to 10,000mm).
  • 5 Year Warranty
  • High Power LED Strip - Super Bright!
  • Change the colour or dim the brightness through remote control, mains wall plate or through our APP & smart speaker (Sold Separately).
  • Order online or call 0333 443 2465
£7.67 £9.20 (£9.20 per metre) Was £11.00 Save £1.80
Compatible When Used With Our Smart Home Module
IOS tect icon
Android test icon
Alexa test icon
Google Home test icon
Remote Control test icon
Up to 5 year guarantee on lightbulbs
Free delivery if order is over £75
RGB LED Tape, IP65 Waterproof, 15w, 60 LEDs P/M
£7.67 £9.20 (£9.20 per metre) Was £11.00 Save £1.80
IP65 RGB Colour Changing Strip Light - RGB Colour Changing Strip Light IP65 RGB Colour Changing Strip Light - RGB Colour Changing Strip Light

RGB Colour Changing Strip Light

Do you like hosting parties, gatherings, or events? If that is the case, level up your space by adding this RGB colour-changing LED strip light! In one LED strip, you will get access to millions of colours, which you can take advantage of when setting up the aesthetic and atmosphere of your get-togethers! 

Aside from that, this LED strip light is powered by LED technology, so it would not leave a massive dent in your electrical bill, even if it produces outstanding illumination. In fact, it only needs 15w per metre! On top of that, it can last for 50,000 hours which is ten times longer than an average lighting solution!

24v DC - Requires an LED Driver

This is a 24v DC LED strip light, meaning you’ll need an LED driver to make it run. You cannot wire it directly to the mains circuit because it’s not like those mains-powered light fixtures.

To know which LED driver to use with your strip lights, you have to multiply the total length of the strips you’re using by the wattage per metre of the strip. So, if your project needs ten metres of the strip and it’s fifteen watts per metre, multiply the two. Then look for an LED driver equal to or higher than the requirement of the strip light. Never use an LED driver with a lower capacity than what your strips need.

IP65 RGB Colour Changing Strip Light - 24v DC - Requires an LED Driver IP65 RGB Colour Changing Strip Light - 24v DC - Requires an LED Driver
IP65 RGB Colour Changing Strip Light - Free Bespoke Cutting Service IP65 RGB Colour Changing Strip Light - Free Bespoke Cutting Service

Free Bespoke Cutting Service

We offer a free bespoke cutting service when you purchase this LED strip light! Let us know the length that you need, and we’ll see to it that it’s delivered to you as you requested. Just note that this LED strip is cuttable every 100mm, so when you place your order, round off to the nearest 100mm.

Besides the free cutting service, we’ll also solder a 1-metre cable at the end of the strips so you can immediately proceed to the installation when you get your order. No more measuring, cutting and soldering! If you need a longer cable or have a specific request for your strip lights, call us at 0333 443 2465, and we’ll gladly assist you.

Different Control Options

This LED strip light has different control options, so you can tailor-fit it based on your lifestyle and requirements. You can pair it with an LED-compatible traditional wall dimmer, remote control or smart speakers like Alexa or Google Home. Just ensure that you have the right driver-controller combination to guarantee that it will work.

If you use your strip lights with our extensive collection of remote control, you will need a standard LED driver. Alternatively, if you prefer an LED-compatible wall dimmer, couple it with a dimmable LED driver. Nevertheless, you will still need a regular LED driver to make the strip lights work whether or not you want to dim them.

IP65 RGB Colour Changing Strip Light - Different Control Options IP65 RGB Colour Changing Strip Light - Different Control Options
IP65 RGB Colour Changing Strip Light - IP65 Rated; Water-Resistant IP65 RGB Colour Changing Strip Light - IP65 Rated; Water-Resistant

IP65 Rated; Water-Resistant

If you’re looking for a lighting solution for your bathroom or in areas where water is frequent, your search is over! This LED strip light is IP65 rated; therefore, you can use it anywhere in your home, including the bathroom’s zone 1. Even if jets and splashes of water reach this strip light, it will not short-circuit or malfunction!

You can use this LED strip light as task lighting over your kitchen counters and work desk or accent lighting behind the television in your living room. You can also utilise this LED strip to highlight architectural structures and unique features in the room to give it more depth and dimension!

Quick and Easy Installation

Installation is stress-free when it comes to this LED strip light since it has an adhesive backing which adheres to almost any surface. Just wipe the area clean, peel the cover of the 3M double-adhesive and stick it to where you need the strip lights to be! 

As for the wiring, follow the installation instructions and get the right LED driver for your preferred control option. You can also use an LED profile to protect the strip lights from dust, dirt and curious finger and give it a more finished and refined look!

Although mounting this strip light is fairly easy, call for an electrician if you’re not confident doing it alone.

IP65 RGB Colour Changing Strip Light - Quick and Easy Installation IP65 RGB Colour Changing Strip Light - Quick and Easy Installation
More Information
Average Life (Hours) 50,000
LED Strip Type RGB
IP Rating IP65
LED Colour RGB (Colour Changing)
Beam Angle 120°
Length Max 10m
Dimmable Dimmable
Input Voltage 24v DC
Power 15w
Cable Length 1000mm
Warranty 5 Years
Width 10mm

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Related products
Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved