100 Watt LED Driver - 3 Year Warranty In 12v or 24v DC

Only %1 left
SKU
DRV-100W
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Power
100w
Power
Input Voltage
220-240v
Input Voltage
Warranty
3 Years
Warranty
Dimmable
Non-Dimmable
In stock
  • Available in 12v or 24v DC
  • Mains wirable LED driver
  • Ideal for low-voltage LED tapes & under cabinet lights
  • Pre-wired with a 1-metre power cable 
  • 3-year warranty
£26.66 £31.99 Was £59.99 Save £28.00
Up to 5 year guarantee on lightbulbs
Free delivery if order is over £75
100 Watt LED Driver - 3 Year Warranty In 12v or 24v DC
£26.66 £31.99 Was £59.99 Save £28.00
100w LED Driver - 100w 12v24v DC LED Driver 100w LED Driver - 100w 12v24v DC LED Driver

100w 12v/24v DC LED Driver

LED lights are the leading lighting solution today. They’re energy-efficient, long-lasting, cost-effective, eco-friendly, durable, and have better light quality than traditional fixtures! While there are some LED lighting that is mains powered, meaning they can be wired straight to the mains circuit, there are those that cannot be connected directly. Low-voltage LED fixtures need a LED driver to make them work!

This LED driver has a maximum capacity of 100w and is available in 12v DC or 24v DC. Ensure that you have the correct driver for your lights because it may not work if you don’t. Also, it’s flicker-free, meeting all the new regulations in the UK and EU!

Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit)

This is a mains wirable LED driver. It means you can connect the driver directly to the mains circuit! When you hardwire your driver directly to the mains, you can switch on/off your fixtures using the standard wall light switch. If you don’t want to hardwire, you can add a plug at the end of the driver and plug your lights into the next available socket!

If you do the first control option, you’ll have a cleaner and more refined setup, but it requires more technical skills and knowledge. Alternatively, if you do the second method, the plug and wire are visible (unless you take more consideration into hiding them), but it’s more DIY-friendly!

100w LED Driver - Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit) 100w LED Driver - Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit)
100w LED Driver - Ideal for Low-Voltage LED Tapes & Under Cabinet Lights 100w LED Driver - Ideal for Low-Voltage LED Tapes & Under Cabinet Lights

Ideal for Low-Voltage LED Tapes & Under Cabinet Lights

You can use this LED driver with our extensive collection of low-voltage 12v or 24v DC LED under cabinet lighting and LED tapes. Just review the technical specifications of the fixtures you plan to purchase and ensure they have a 12v or 24v DC input voltage. 

In addition, remember to always use the correct LED driver with the recommended number of lights so your LED fittings can live up to their long average life. To know how many cabinet lights or how much LED tape you can connect, check the fitting’s product description for the suggested number of lights for specific drivers. That way, you can avoid wasting your time, money, and effort or be disappointed with the wrong purchase.

IP20 Rated - Indoor Applications Only

This LED driver is suitable for indoor use only because it is just IP20-rated. You must install it away from areas where liquids are frequent because it does not have adequate protection to keep them out. Nonetheless, you have nothing to worry about because there are still many ways to use this driver in your home!

If you are planning to add ambient lighting or accent lighting in your living room, recreation room, game room, bedroom, hallway, or dining room, you can pair this LED driver with an LED strip light. You can also use it with under cabinet lights to add task lighting in your storage room, home office or kitchen! 

100w LED Driver - IP20 Rated - Indoor Applications Only 100w LED Driver - IP20 Rated - Indoor Applications Only
100w LED Driver - Straightforward Installation 100w LED Driver - Straightforward Installation

Straightforward Installation

Installing this LED driver is stress-free and hassle-free! As stated above, it is mains wireable, so you can connect it directly to the mains circuit. Also, it is pre-wired with a 1-metre-long power cable that can be linked directly to your lighting circuit. Just make sure that you will only use light fittings that are compatible with the LED driver to prevent any malfunctions from happening.

This LED driver has built-in safety features for short circuits, overloading, and over-current, guaranteeing that your driver and lighting fixtures are guarded! These protections are necessary to ensure the safety of not just your lights but you, your family, and your home as well!

3 Year Warranty

We offer a 3-year warranty for this LED driver, so you can use it with your lights without any hesitations! Shopping online has advantages and disadvantages. While it's convenient since you can get anything you need while sitting on your sofa, there's no assurance whether or not you'll receive what you see on the website. So, through this guarantee, we hope our confidence in this LED driver will be reflected and encourage you to buy it!

If you have any issues or questions about this LED driver or any of the lighting solutions listed on our websites, feel free to call or email us. Our team is always ready to assist you with your concerns!

100w LED Driver - 3 Year Warranty 100w LED Driver - 3 Year Warranty
More Information
Quick Order Code DRV-100W
Switch Type Rocker Switch
Length 170mm
Width 44.3mm
Height 28mm
IP Rating IP20
Dimmable Non-Dimmable
Input Voltage 220-240v
Power 100w
Warranty 3 Years

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Related products
Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved