RGB Controller - 4 Channel - Receiver Module

SKU
SLG3RGBRC
Input Voltage
12-24v DC
Input Voltage
Warranty
1 Year
Warranty
Dimmable
Dimmable
IP Rating
IP20
IP Rating
In stock
  • 6 Amp per channel, R, G, B In total 18 AMP.
  • 12v - 24v DC.
  • This module has a maximum load of 144w at 12v to 288w at 24v.
  • Receiver Dimensions L85mm x W65mm x H25mm.
  • Further Tech Data can be supplied on request.
  • 1-year warranty
  • Please use this product only with non-dimmable LED Drivers. 
£16.66 £19.99 Was £29.99 Save £10.00
Buy more, save more!
  • Buy 3 £15.82 £18.99 save 5%
  • Buy 5 £14.99 £17.99 save 10%
  • Buy 10 £13.32 £15.99 save 20%
Delivery
RGB Controller - 4 Channel - Receiver Module
£16.66 £19.99 Was £29.99 Save £10.00
RGB Receiver Module - RGB Receiver Module RGB Receiver Module - RGB Receiver Module

RGB Receiver Module

LED strips are a versatile lighting solution that you can easily install around your home. So, there is no doubt that you might already have some in your bedroom, kitchen, dining room, or living room. If you're looking for a way to control your LED tapes conveniently, then you should consider adding our remote controller and receiver kit.

With this, you will be able to manage your RGB LED strip in four zones (rooms) individually or separately. Given that you already have the LED receiver and remote control kit, but you still want to increase the zones covered by your remote, then you can add this RGB LED receiver module!

Compatible with 12v or 24v LED Strips

Our RGB controller can be used with any 12v or 24v LED lighting, such as our range of LED Tape. Aside from that, this module can take a maximum load of 144 watts for a 12v light and a maximum of 288w for a 24v light. Keep that in mind to guarantee that your lights and the other parts of your lighting system will work properly!

This RGB controller module has a dimension of 85mm x 65mm x 25mm, which is pretty tiny, so it won’t be an eyesore when you mount it. It’s perfect if you’re doing wall art with your strip lights or adding LED tapes in your display cabinets!

RGB Receiver Module - Compatible with 12v or 24v LED Strips RGB Receiver Module - Compatible with 12v or 24v LED Strips
RGB Receiver Module - Add-On to RGB Controller and Receiver Kit RGB Receiver Module - Add-On to RGB Controller and Receiver Kit

Add-On to RGB Controller and Receiver Kit

Kindly take note that this product is only an add-on module to our remote controller and receiver kit. You won't be able to control your RGB strips without a remote control, and each individual zone requires a receiver module and power supply to function. So, make sure that you have the complete accessories to make your centralised light control possible.

Aside from this receiver module, you can also purchase the remote control, strip light, and LED driver separately. The kit is great if you're starting from scratch and don't have a remote or receiver. However, if you need extra receiver modules or you need a replacement remote, you can buy them individually!

Straightforward Installation

This receiver module has a straightforward installation. You only have to follow the mounting instructions and prepare all the other components the system requires and the tools you’ll use. If you already have an RGB controller kit and you’re only planning to expand the scope of the remote, you won’t take that long to finish. However, it may take longer if you still need to install the LED strip, driver, and controller and add an additional module. Nevertheless, all the effort is worth it once you see the result! 

If you’re not confident DIY-ing the mounting or have never dealt with electrics, it’s best to call for an electrician or someone with experience installing lights. 

RGB Receiver Module - Straightforward Installation RGB Receiver Module - Straightforward Installation
RGB Receiver Module - IP20 Rated - Indoor Application RGB Receiver Module - IP20 Rated - Indoor Application

IP20 Rated - Indoor Application

This RGB controller module is IP20-rated only. Therefore, you can only use it indoors, away from areas where water and liquids are constantly present. This device does not have adequate protection against those elements, so be extra careful where you mount them. Still, you can put this lighting accessory in many areas of your home!

You can install it in your bedroom, dining room, kitchen, vanity room, living room, home office, laundry room (not near the water sources), hallways and more! Dimmable lighting can boost the visual appeal of your space, and it’s more energy-efficient and long-lasting than regular fittings. So, get this device now and enjoy the transformations and benefits that it brings!

1 Year Warranty

We offer a 1-year warranty for this RGB controller so you can enjoy it for a long time without any worries. Shopping online can go from excellent to disaster if you’re not careful. Yes, there is the convenience you can get since you can purchase anything without stepping out. However, there’s no assurance whether or not the product you’ll get will like the pictures on the website. So, with this warranty period, we hope that our confidence in this product will be reflected and, in turn, encourage you to buy it!

If you want to have more information about this RGB controller or how to set it up with your four-channel kit, you can email or call our team, and they will assist you any way they can — call us at 0333-443-2465 or email support@simplelighting.co.uk.

RGB Receiver Module - 1 Year Warranty RGB Receiver Module - 1 Year Warranty
More Information
Output Voltage 12-24v DC
Max Output Current 12a
Length 85mm
Width 65mm
Height 25mm
IP Rating IP20
Dimmable Dimmable
Input Voltage 12-24v DC
Warranty 1 Year
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved