LED Tape, High Power Cool White 15w P/M
- Cut To Measure - personalised to your requirements.
- We solder a 1m long wire onto the end of each LED Strip for you.
- Available in any length between 0.1m to 10m long (100mm to 10,000mm).
- 5 Year Warranty
- High Power LED Strip - Super Bright!
- Dimmable through remote control, mains wall dimmer or through our APP & smart speaker (Sold Separately).
- Order online or call 0333 443 2465
Outstanding Brightness! 1128 Lumens per Metre
LED lighting fixtures can efficiently convert most of the energy they consume into light with very minimal going to waste. Because of this, they don’t require much electricity even while producing outstanding brilliance!
Powered by that technology, this LED strip light only needs 15w per metre to produce 1128 lumens maximum brightness with a broad 120-degree beam angle! In addition, it has an average lifespan of 50,000 hours which is ten times longer than traditional lighting. With this, you’ll be able to lessen not only your electrical expenses but also your maintenance cost! So, if you want to enjoy all these perks, swap out your old, energy-consuming lights with this LED strip light.
Cool White LED Colour (6000K)
This LED strip light has a cool white colour temperature (6000K). Not sure what it looks light? Unlike warm white light with a yellowish shade that looks like an old incandescent bulb or natural white with no hints of blue or yellow (it resembles a cloudless sunny day), cool white light has a crisp bluish tone. Because of this, it makes an excellent task lighting!
Cool white light can make a person focus on the activity and boost the space’s functionality. If you are using it when chopping vegetables or finishing your work, you won’t have a hard time seeing things and reaching for what you need will be easier.
24v DC - Requires a LED Driver
Because this LED strip light is 24v DC, you’ll need a LED driver to make it function. It’s not like those mains power lighting solutions, which you can wire directly to the mains circuit. If you did that by mistake, the strip light will not work.
To know the appropriate LED driver to couple with your strip lights, multiply the total length you’ll use by the wattage per metre of the strip light. So, if you’ll use 5 metres and the wattage per metre is 15w, multiply the two and the answer with be the LED driver you’ll have to use. Always look for a driver with the same or higher capacity than your strips to avoid overloading.
Cut To Measure
We offer a free bespoke cutting service when you purchase this LED strip light, so you don’t have to buy more than what you need! Let us know the measurements, and we’ll prepare them accordingly. Just note that this LED strip light is cuttable every 100mm. When you inform us, ensure that you round off to the nearest 100mm.
Aside from cutting to your desired measurements, we’ll also solder a 1-metre cable onto the end of each strip light so that you can proceed to installation immediately when your order arrives. No more time-consuming measuring, cutting and soldering! If you have a more specific request, call us at 0333 443 2465 so we can discuss it and assist you accordingly!
Various Control Options
There are many ways to manage this LED strip light. You just need to pair it with the correct combination of the controlling device and LED driver. Some of the ways that you can control this LED strip light is via traditional wall dimmer, remote control, or smart speakers like Alexa or Google Home!
If you don’t want to dim your strip lights or prefer a remote control, pair it with a standard LED driver. On the other hand, if you plan to use a traditional wall dimmer, use a dimmable LED driver. To guarantee compatibility, get an LED-compatible wall dimmer because otherwise, your strip lights might flicker or not dim at all.
Installation is not an issue with this LED strip light. After ensuring you have the correct LED driver and device for controlling, clean the surface you intend to mount the strip lights. Then, go through the installation procedure and follow it step-by-step. After, remove the cover from the 3M adhesive backing and stick it onto the clean surface. You can also consider adding an LED profile to make the strips look more refined and finished!
Although installing a strip light is fairly easy, call for an electrician if you cannot do it yourself. That way, you’ll avoid any accidents and have peace of mind that your strip lights are mounted correctly!
|Average Life (Hours)||50,000|
|LED Strip Type||Single Colour|
|LED Colour||Cool White 6000K|
|Input Voltage||24v DC|