LED Tape, High Power 15w P/M Cool White 6000K

SKU
SLGIPHPLEDCW
Average Life (Hours)
50,000
Average Life (Hours)
IP Rating
IP65
IP Rating
Beam Angle
120°
Beam Angle
A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
Lumens
1012
Lumens
In stock
  • Cut To Measure - personalised to your requirements.
  • We solder a 1m long wire onto the end of each LED Strip for you.
  • Available in any length between 0.1m to 10m long (100mm to 10,000mm).
  • 5 Year Warranty
  • High Power LED Strip - Super Bright!
  • Dimmable through remote control, mains wall dimmer or through our APP & smart speaker (Sold Separately).
  • Order online or call 0333 443 2465
£14.00(£14.00 per metre)
Compatible When Used With Our Smart Home Module
IOS tect icon
Android test icon
Alexa test icon
Google Home test icon
Remote Control test icon
Up to 7 year guarantee on lightbulbs
Free delivery if order is over £75
LED Tape, High Power 15w P/M Cool White 6000K
£14.00(£14.00 per metre)

This high-power, cool white, IP65 LED tape is amazing for areas where you need strong illumination! It’s perfect for use in both residential and commercial installations & is suitable for areas where water is present, such as zone 1 of bathrooms, kitchens and even outdoors!

This LED tape has thousands of uses, from lighting the kitchen, bathroom or patio at home to illuminating store displays, bars and signage.

The 60 cool white coloured LEDs per metre give a crisp, bright light (1012 Lumens per metre), improving visibility and providing an energising vibe while only consuming 15 watts per metre.

It’s very simple to install this LED tape, thanks to its 3M branded self-adhesive backing - all you need to do after you’ve made sure that your surface is clean, dry and free from dust is peel off the cover from the adhesive and press your LED strip onto the surface. It’s very thin at only 3mm deep so it’s easy to conceal the actual tape itself while still receiving the maximum light output.

We offer our customers a FREE preparation service - we will cut your LED tape to the exact length you need & solder on a 2-metre cable to one end, ensuring that you don’t have to spend more money than you have to & that your tape arrives ready for installation. We can cut this tape in increments of 100mm up to a maximum of 10 metres. Please make sure that you round DOWN to the nearest 100mm when you order.

We are so confident that this IP65, high powered LED tape is the best quality that we offer a 5-year warranty.

You will need a standard LED driver to run this LED tape. You can also use a standard LED driver if you would like to control/dim your tape with something from our great range of remote controls & wall controllers. If you plan to use a traditional wall dimmer then you will need a DIMMABLE LED driver. Also, be sure to check that the traditional dimmer is LED compatible.

Specifications

  • 24v DC
  • Power (per metre) - 15 Watts
  • Lumens (per metre) - 1012
  • Beam angle - 120°
  • LEDs (per metre) - 60
  • Cuttable every - 100mm
  • Maximum continuous length - 10 metres
  • Uses branded 3m self-adhesive
More Information
Average Life (Hours) 50,000
LED Strip Type Single Colour
IP Rating IP65
LED Colour Cool White
Beam Angle 120°
Length Max 10m
Lumens 1012
Dimmable Dimmable
Input Voltage 24v DC
Power 15w
Cable Length 1000mm
Warranty 5 Years
Width 10mm
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2020 Simple Lighting. All Rights Reserved