Simple Lighting Co.
0151 375 92100333 443 2465Order & Advice line
- Product Description
- Specifications
- Reviews
- Delivery & Returns
- Related Products
Product Description
This 10 multi-pack of fire rated downlights is produced to the highest quality and also meets all relevant British Safety (BS) standards, including:
- Tested to 90 minutes’ protection
- Tested and assessed to BS 476, parts 21, 22 & 23
- Part "E" compliant (acoustics)
- This light is GU10 base, and is 230v, meaning it is suitable for mains power, and does not require a transformer to run.
Above you have the option to select a 10 pack of LED bulbs in either:
- 5w Cool White GU10 LED Bulb – 320 Lumens
- 5w Warm White GU10 LED Bulb – 320 Lumens
Product Features:
- Diameter: 80mm
- Cutout Hole: 65mm
- Length: 115mm
- 240v Mains
- IP20 Rated
- Steel Can
- Meets all relevant BS Regulations
- Independently tested to conform to BS Standards by IFC Group
- This fitting is also available in Brushed Chrome and White Finish.
Specifications
-
Product Range Multi Packs
-
Type of Fitting Fixed Downlight
-
SKU FGFC-10PKPC
-
Voltage 240V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
-
Length 115mm The physical length of the product
-
Diameter 80mm The measurement across the face of the light source. Normally in mm unless other stated.
-
Cutout Size 65mm The size of the cutout required to install the light. This is normally measure in mm unless otherwise stated.
-
Delivery Time Available Next Day Delivery if Ordered Before 3pm
-
Finish Polished Chrome The overall visible finish of the product. Such as stainless steel, chrome, white etc.
-
Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
-
IP20 Ingress protection rating. Classifies the degree of protection against water and dust.
-
Lamp Base GU10 Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
-
Maximum Load 35w Flammable Surfaces / 50w Non-Flammable Surfaces The maximum electrical load that the product is manufactured to accept. Normally measured in Watts or AMP. EG, if you have a product which is 150w and lights which are 50w each then 3 x 50w = 150w which is the maximum load.
For delivery or returns information, please refer to the page below.
