5m Long 4mm Flexible Neon Flex / Strip Lighting - Dotless - 4000K Natural White
- Natural white light, 4000K
- Cuttable every 100mm
- IP65 - Ideal for outdoor use
- Slimline design, 4mm wide x 10mm deep (12mm deep with end caps installed)
- Wired both ends with a 2m long cable, so you can cut freely and split the 5m long reel - if needed
- Includes end caps and mounting brackets
- Compatible with our Smart Home (WL5 module)
- 3-year warranty
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Neon Flex Dotless Strip
When it comes to versatile lighting solutions, the first thing that comes to mind are LED tape lights, and one of its latest innovations is this neon flex dotless strip! It’s stylish, flexible, effortlessly cuttable, and fairly slim, letting you bend the tape light to nearly any shape you wish to do. This LED tape light is also 4mm thick only, so you can tuck it behind furniture pieces and cabinetry should you prefer it out of sight.
This neon flex strip light is sold in a 5-metre-long roll with pre-soldered 2m long cables on each end, presenting adaptability to diverse setups. You can cut it every 100mm, so you can customise it to your specific necessities. Remember to trim within the cutting lines to avoid harming the tape light.
Natural White Light, 4000K
This neon flex LED tape light is available in a natural white light LED colour. How is it different from other colour temperatures? Unlike cool white, which has a crisp bluish tone, or warm white light, which is similar to an old incandescent bulb with its yellowish shade, natural white light has no hints of blue or yellow, resembling a cloudless sunny day. Typically, natural white light is utilised for task lighting as it offers a practical and brilliant working station that is comfortable on the eyes!
With a natural white neon flex LED tape light under your kitchen cupboard, the countertops below it will be more functional and safe for chopping, mincing and slicing!
Outstanding Luminance! 540 Lumens per Metre
Powered by outstandingly energy-efficient LED technology, this neon flex LED strip light will amaze you with how little electricity it needs to produce remarkable illumination. While only consuming 5w of power per metre, it can produce 540 lumens (2700 lumens for 5 metres) maximum brightness with a wide 160-degree beam angle!
Furthermore, it has a comprehensive average lifespan of 30,000 hours, which is much longer than a traditional lighting solution. When you have this tape light, you can expect a stunningly bright and energy-saving interior. So, do not waste your resources on fittings that run on so much power only to produce mediocre luminance. Choose this LED tape light!
IP65 Rated - Water-Resistant
This neon flex LED tape light is IP65-rated, so it has adequate protection against liquids. Even if jets and splashes of water come into contact with it, this lighting solution will not short-circuit or malfunction. Where do you usually integrate this neon flex tape light? You can use it in your living room, garage, bedroom, kitchen, home office, dining room, laundry room, storage room, pantry and bathroom (including zone 1).
Yes, this neon flex strip light is water-resistant. However, it’s not entirely waterproof, so it is unsuitable for underwater applications. If you plan to do that kind of installation, you must find a fitting with a much higher IP rating.
Straightforward to Mount
Mounting this LED neon flex tape light is effortless as long as you prepare all the necessary tools and equipment and review the mounting guidelines and product manual. This product includes an accessory kit with mounting brackets and end caps at no extra cost to help speed up the installation time!
We would encourage the most qualified DIY enthusiasts to mount themselves. However, if you’re not sure about DIY-ing, it’s best not to push yourself and call for an electrician. They are acquainted and experienced, so they can execute the installation process correctly and safely. Also, you’ll have fewer worries and more confidence that your LED tape lights are mounted properly!
24v DC - LED Driver Needed
This neon flex LED strip light is 24v DC; therefore, you’ll have to use an LED driver to make it run. It’s not a mains power light fixture, so you cannot connect it straight to the primary power supply. Note that without an LED driver, this tape light will not work!
For the best performance, we recommend using our 24v LED drivers with this neon flex LED strip light. These drivers are not only high-performance but also developed to match the quality of our tape light. It's important to remember that the 5-metre-long roll of this neon flex strip totals 25 watts of power. Therefore, you'll need an LED driver with a similar or higher wattage count, such as our 30w LED driver.
| Kit Length | 5m Kit |
|---|---|
| Average Life (Hours) | 30,000 |
| LED Strip Type | Single Colour |
| IP Rating | IP65 |
| Choose LED Colour | Natural White 4000K |
| Beam Angle | 160° |
| Length | 5m |
| Lumens | 2700 |
| Dimmable | Dimmable |
| Input Voltage | 220-240v |
| Power | 25w |
| Cable Length | 2 Metres |
| Warranty | 3 Years |
| Width | 4mm |
For delivery or returns information, please refer to the page below.