150w IP20 LED Driver, 12v or 24v DC

Only %1 left
SKU
DRV-150W
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Power
150w
Power
Input Voltage
220-240v
Input Voltage
Warranty
3 Years
Warranty
Dimmable
Non-Dimmable
In stock

​Further Info:

  • 3 Year Warranty
  • Flicker Free LED Driver
  • Dimensions: 179 x 62 x 30mm
  • Built-In Overload / Short Circuit Protection
£33.32 £39.99 Was £74.99 Save £35.00
Up to 5 year guarantee on lightbulbs
Free delivery if order is over £75
150w IP20 LED Driver, 12v or 24v DC
£33.32 £39.99 Was £74.99 Save £35.00
150w LED Driver -  150w 12v24v DC LED Driver 150w LED Driver -  150w 12v24v DC LED Driver

150w 12v/24v DC LED Driver

Are you looking for a lighting solution that will help you cut down the cost of your electricity bill? Then, it would be best if you switched to LED lights because not only are they cost-effective and energy-efficient, but they are also long-lasting and eco-friendly. It’s like killing four birds with one stone!

While there are LEDs that are mains powered, meaning you can wire them directly to the mains circuit to work, most of them are not. Usually, LEDs have a low voltage, and because of this, you’ll need an LED driver to power them. Fortunately, we have just what you need, our 150w, 12v or 24v DC LED driver. With this, you’ll be able to power a broader range of low-voltage LED lights!

IP20 Rated - Indoor Use Only

Since this is an IP20-rated LED driver, you can only use it indoors. It must be installed away from areas where water and other liquids are constantly present because it does not have adequate protection against them. Still, you have nothing to worry about because there are many places where you can add this driver!

You can pair it with the under cabinet lights in your kitchen, home office shelving or wardrobe or use it with the strip lights in your bedroom, living room, recreation room, dining room, hallways and storage room. Just let your creativity flow, and you’ll discover unique ways to use this LED driver with your low-voltage lights!

150w LED Driver -  IP20 Rated - Indoor Use Only 150w LED Driver -  IP20 Rated - Indoor Use Only
150w LED Driver -  Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit) 150w LED Driver -  Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit)

Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit)

This is a mains wirable LED driver, which means you can wire it directly to your mains circuit. You can hardwire it straight to the main power supply to control your fittings using a standard light switch on the wall, or if you want a different alternative, you can add a plug at the end of the driver so that you can plug your lights into an available socket to switch them on/off. 

Hardwiring will require more technical skill and knowledge, but it will give you a cleaner setup. On the other hand, adding a plug is more DIY-friendly, but you may see the plug and wire, and there needs to be a nearby empty socket.

Ideal for Low Voltage LED Tapes & Under Cabinet Lights

You can use this LED driver with 12v DC, and 24v DC low-voltage LED strip lights and under-cabinet lighting. However, before connecting anything, ensure that you're using a 12v DC driver with a 12v DC fitting and a 24v DC driver with a 24v DC fixture.

In addition, remember to only use the appropriate LED driver with the recommended number of lights so that your LED fixture can live up to its long-expected average lifespan. You'll find our suggested number of lights for specific drivers in our product descriptions, so read through them before buying anything. That way, you won't waste your effort, time, and money or end up being disappointed because you got the wrong combination.

150w LED Driver -  Ideal for Low Voltage LED Tapes & Under Cabinet Lights 150w LED Driver -  Ideal for Low Voltage LED Tapes & Under Cabinet Lights
150w LED Driver -  Quick to Mount 150w LED Driver -  Quick to Mount

Quick to Mount

This LED driver is quick to mount! As stated before, it is mains wireable, so you can wire it directly to the mains circuit. Just guarantee that you will only use lighting fixtures that are compatible with the LED driver to prevent any malfunctions. Also, it is crucial to note that the 150w driver in 24v has a maximum power capability of 150w, but the 12v version has a maximum power of only 132w.

Regarding safety and quality, this LED driver is tested to the highest standard and meets all British and European safety standards. Plus, this is a commercial-grade power supply that also includes a PFC rating of >90 (Power Factor Correction), which ensures that your LED lighting is being given the correct number of watts and a stable voltage guaranteeing the long life of your LED products.

3 Year Warranty

This LED driver comes with a fuss-free and stress-free 3-year warranty! Shopping online has pros and cons. While it's super convenient since you can purchase anything you need without going out, there's no assurance whether or not the product you’ll receive will be the same as the images on the website. So, we hope that our confidence in this LED driver will be reflected with this extended guarantee and, in turn, encourage you to buy it!

If you have any issues or inquiries about this LED driver or any of the products on our websites, feel free to call or email us. Our team is always ready to assist you with your concerns!

150w LED Driver -  3 Year Warranty 150w LED Driver -  3 Year Warranty
More Information
Quick Order Code DRV-150W
Switch Type Rocker Switch
Length 180mm
Width 63mm
Height 30mm
IP Rating IP20
Dimmable Non-Dimmable
Input Voltage 220-240v
Power 150w
Warranty 3 Years
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Related products
Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved