Pack of 3 Black Aluminium Profiles, Recessed With Cover and End Caps, 2M
- Pack of 3 Top-Quality Black Aluminium Profiles
- Ideal for all IP20 LED strips with 12mm max width
- For recess mounting - a 17.4mm cut-out hole is required
- Comes with a black diffuser
- Includes end caps and mounting brackets
- 5-year warranty
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Pack of 3 Black Aluminium Profiles with Black Diffuser
If you like a moody interior design, this LED profile can further elevate your aesthetics! Unlike the typical anodised aluminium finish that most profiles have, this LED profile has a sleek black finish. You can camouflage it with the rest of your dark walls or use it to complement your wood tones! Plus, this LED profile has a black diffuser, which is excellent if you prefer low lighting.
You’ll not just get one LED profile when you purchase this product. It’s an affordable bundle with three of these gorgeous black LED profiles! So, if you plan to use this for your home makeover, just get this multi-pack instead of purchasing it individually.
Straightforward Recessed Installation
Installation is the least of your worries when it comes to this LED profile. It has a straightforward installation, and all the end caps and mounting brackets are included! You only need to clean the surface where you’ll mount the strips and profile, prepare all the essential tools and equipment and review the mounting instructions.
This LED profile is recessed; therefore, you have to trim a 17.4mm cut-out hole for it to sit flush against the intended surface. Recessed-mounted lighting solutions are perfect for narrow spaces because they will not take up as much room as a surface-mounted fitting would.
Remember, if you are not confident DIY-ing the installation, call for an electrician or an acquaintance who knows about electrics!
Ideal to Use with 12mm Wide LED Strip Lights
You can only use a 12mm wide (and below) LED strip light with this LED profile. If you’re worried that this will narrow down your choices, you don’t have to fret. While there’s a specific width that you have to consider, we still have an extensive collection of strip lights that this LED profile can accommodate!
To avoid wasting your time, money and effort, ensure that you always double-check the measurements of the LED profile and strip light you’ll use. If you really want to use this one, guarantee that you don’t get a strip light that’s wider than 12mm. However, if you already have a strip light, we still have other LED profiles that you can check out!
IP20 Rated, Indoor Use Only
Because this LED profile is IP20-rated, it is only ideal for indoor use. It does not have adequate protection against liquids, so it must be kept from areas where water is constantly present. Still, there are many rooms in your home where you can use this profile! You can use it with the strip lights in your hallways, dining room, wardrobes, living room, storage room, bedroom, kitchen cabinets, etc.
If you enclose your strip lights in an LED profile, will it make the strips water-resistant? That depends on the IP rating. If you pair an IP20-rated LED profile with an IP20-rated strip light, the installation will not be waterproof since they’re both IP20. However, if you have an IP65-rated strip light, even if your LED profile is IP20, it’s good enough to use in the bathroom and other places where liquids are common.
5 Year Warranty
We offer a 5-year warranty for this LED profile bundle so that you can use it to the fullest with peace of mind! We know that online shopping has pros and cons. While it’s convenient since you can get almost anything without moving an inch from your sofa, there’s no assurance whether or not the product you’ll receive will have the same quality as the images you saw on the website.
So, with this extended guarantee, we hope that the confidence we have in this product will be reflected, giving you more certainty and encouraging you to buy. If you have any questions about this product or any of the ones on our website, feel free to call or email us!
The Dimensions
Is it necessary to know the dimensions of your lighting fixture or accessory? Of course, it is essential! When it comes to this LED profile, if you are aware of its measurements, you will be able to estimate the quantity you have to purchase more accurately. You will not end up buying too much that you will have to worry about storage after the construction is done or too little that it can delay your meticulously planned construction timeline!
So, to avoid any problems and ensure a trouble-free build, keep in mind that this LED aluminium profile has an internal width of 12.35mm, a 2000mm length, 24.5mm width, and 7mm height.
| Quick Order Code | PRO-RES-B2-7MM-2M-3PK |
|---|---|
| Internal Width | 12.35mm |
| IP Rating | IP20 |
| Height | 7mm |
| Dimmable | Dimmable |
| Length | 2000mm |
| Cut Out Hole | 17.5mm |
| Width | 24.5mm |
| Finish | Black |
| Warranty | 5 Years |
For delivery or returns information, please refer to the page below.