Pack of 25 Fixed, Fire-Rated LED Downlights in a Matt Black Finish
- Pack of 25 fixed downlights
- Height: 113mm (with blue terminal block attached) and 88mm (leaving terminal block loose)
- Ideal for solid, web and i-joist ceiling types
- Fire-rated to 30, 60 and 90 minutes of protection
- Slim profile with a matt black finish
- Dimmable with a GU10 dimmable bulb (not included)
- 5-year warranty
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Pack of 25 Fixed Downlights & IP20 Rating
You can get this LED downlight in a mega-pack of 25, perfect for a mid-size build or home makeover. The downlights also have an IP20 rating, so you can use them almost anywhere in your home except the bathroom and water zones! It’s not water-resistant, so keep these downlights out from those areas and focus on integrating them in your recreation room, living room, dining room, pantry, hallways, bedroom, game room, home office, laundry room, storage room, etc.
Furthermore, this LED downlight has a fixed gimbal. Ensure that you are 100% certain of its placement before trimming a hole because once it’s up, you cannot change the direction of the light beams!
Fire Rated to 30, 60 and 90 Minutes; Suitable for Solid, Web, and I-Joist Ceilings
This LED downlight is fire-rated to 30, 60 and 90 minutes of protection for solid joist ceilings and suits web and I-joist ceilings for 30 minutes of protection. Why should you get a fire-rated
downlight?
When you cut a hole into your ceiling, its natural fire barrier is compromised. Even if you eventually put the downlight into the gap, it cannot fill the tiny cracks the fire can effortlessly slip into. Only a fire-rated downlight like this one can mend the fire integrity of your ceiling because it's developed with an intumescent pad that expands when exposed to a precise temperature. This pad acts as a seal, blocking the tiny crevices surrounding the downlight, preventing the fire from spreading!
Works with a GU10 Bulb
This LED downlight has a GU10 lamp holder, so you can use any GU10 lamp with it. Just remember that it's a dimmable fitting, so if you want to take advantage of its dimming function, you have to use it with a dimmable GU10 bulb and a compatible dimmer switch!
The GU10 bulb is available in three LED colours: cool white, natural white, and warm white light. Cool white and natural white are both suitable for task lighting. The only distinction between the two LED colours is that cool white has a crisp bluish hue, while natural white has no tints of blue or yellow. Alternatively, warm white light is perfect for ambient lighting because its yellowish shade can create a soothing and relaxing environment!
Open Can Design & Chic Matt Black Finish
This LED downlight has a slimline profile and a chic matt black finish! It's the perfect lighting solution for many design schemes, such as minimalist, rustic, industrial, contemporary, classic, and more. Even if it's a last-minute addition to your space, this downlight will blend in flawlessly and not look out of place. So, if you love redoing your interior to match the holidays and are looking for fixtures that can accommodate your unique ideas, get this LED downlight!
In addition, this top-grade LED downlight has an open-can design, which makes it more practical. Its enhanced cooling system guarantees that the bulb you use with it will last throughout its long average lifespan!
Fast and Effortless Installation! Twist & Lock Mechanism
The installation of this LED downlight is fast and effortless since it is constructed with elements that streamline the process! It has a twist and lock mechanism (allowing you to perform speedy bulb swaps) and push-fit terminal blocks for an easy loop-in/out (no screws needed). With this, you can connect each downlight in series instead of individually linking them to the main power supply!
It’s also mains powered, so you don’t need to buy a separate driver or transformer to make it run. You only need to sketch the positioning of the downlight, trim the cut-out hole, wire it straight to the mains circuit, and add a GU10 lamp of your choice!
Insulation Coverable
This LED downlight is insulation-coverable, so putting loft insulation loosely over its rear is fine. However, you can only do so if you pair it with a GU10 LED lamp with a maximum power of 7w. Other downlight models cannot offer this, but it is a critical feature for recessed lights since insulation enables your home to release heat. This will assist in decreasing the warmth trapped in your home and lowering your electrical consumption!
When it comes to recessed lighting, remember never to put anything over your lights until you read a statement that says you can, or you have confirmation from the supplier or manufacturer that you are allowed to.
| Solid Joist (Fire Rating Standard) | Solid Joist (30/60 & 90 Minutes) |
|---|---|
| I-Joist (Fire Rating Standard_ | I-Joist (30 Minutes) |
| Web Joist (Fire Rating Standard) | Web Joist (30 Minutes) |
| Loft Insulation Coverable | Yes |
| Downlight Type | Fixed |
| Base | GU10 |
| Height | 113mm (With Terminal Block) 88mm (Without Terminal Block) |
| Diameter | 90mm |
| Dimmable | Dimmable |
| Input Voltage | 220-240v |
| Warranty | 5 Years |
| IP Rating | IP20 |
| Cut Out Hole | 75mm |
| Finish | Black |
For delivery or returns information, please refer to the page below.