Fire Rated Downlight, GU10, Fixed - Brushed Chrome Finish With 4.5w Cool White GU10 Bulb

SKU
FRKS-1687
Average Life (Hours)
30,000
Average Life (Hours)
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Power
4.5w
Power
Beam Angle
110°
Beam Angle
A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
Lumens
400
Lumens
In stock
  • 3mm slimline bezel with a gorgeous brushed chrome finish
  • 65mm - 75mm cut-out hole requirement
  • Fire-rated to 90 minutes of protection and suitable for I-joists and solid joists
  • Cool white light, 6000K
  • Made with a loop in/out quick connectors
  • Insulation coverable (7w GU10 LED max wattage)
  • 3-year warranty for the fitting and 2-year warranty for the bulb
  • Includes a 4.5w GU10 LED bulb (not dimmable)
£4.12 £4.94 Was £12.45 Save £7.51
Up to 5 year guarantee on lightbulbs
Free delivery if order is over £75
Fire Rated Downlight, GU10, Fixed - Brushed Chrome Finish With 4.5w Cool White GU10 Bulb
£4.12 £4.94 Was £12.45 Save £7.51

Suitable for 90 Minute Ceilings and Solid Joists and I-Joists

This LED downlight is fire-rated to 90 minutes of protection, meaning the hole you cut to mount your lights is completely resealed, and your ceiling is fortified to extend the time when the fire will spread (in this case, by 90 minutes). A fire-rated downlight like this one can do so because of its built-in intumescent pad that activates when exposed to a specific temperature. When triggered, the pad can block even the tiniest gaps where the fire can pass through.

Aside from that, this LED downlight is suitable for solid joists and I-joists, which not many lighting fixtures can offer. So, if you want to ensure the fire protection of your home, choose this LED downlight!

Insulation Coverable (Maximum 7w GU10 LED Lamp)

Unless stated in the product description, technical specification or packaging of your lights, don’t cover it with anything. Not all fittings are insulation coverable, so instead of improving the safety of your home, it’ll actually make it worse. 

This LED downlight is insulation coverable, but before you start laying out your insulations, there’s a condition that you need to follow strictly. You can only put insulation over your lights if you pair it with a GU10 LED bulb not exceeding a maximum of 7w of power. If you choose to use an LED bulb with a higher wattage (given that it’s still within the capacity of the downlight), you cannot put any insulation.

Includes a 4.5w GU10 Bulb - Not Dimmable with Cool White Light

When you get this LED downlight, you will get a GU10 LED lamp with it. This bulb can produce 400 lumens maximum brightness and a wide 110-degree beam angle while only consuming 4.5w of power. Even if you’re using your downlight for extended hours, it will not inflate your electricity bills too much!

Aside from that, the GU10 LED bulb included with this LED downlight has a cool white light LED colour. Unlike natural white light with no hints of blue or yellow and warm white light with a yellowish shade that resembles an old incandescent bulb, cool white light has a crisp bluish tone that’s often employed for task lighting.

Effortless to Install - Mains Powered & Has Loop-In/Out Connectors

Sometimes, the installation makes a lighting fixture more or less appealing. The more complicated the process, the less likely you’ll want to get it. Well, this LED downlight is perfect for you if that's the case! It has a large screwless terminal block and quick connectors, enabling you to do a quick loop-in/out connection.

Besides that, this LED downlight is mains powered, so you don’t need to get a separate LED driver or transformer to make it work. Once you’re done trimming the 65mm - 75mm cut-out hole, wire the fixture to the mains circuit, add the GU10 bulb, and you’re done! Keep in mind that you should always observe safety precautions and call an electrician if you cannot perform the installation yourself.

Warranty

This LED downlight includes a 3-year warranty for the fitting and a 2-year warranty for the bulb so that you can use it to the fullest for a long time with peace of mind. Online shopping has positive and negative sides. Yes, you can purchase nearly anything without stepping out of your home and roaming around the store. However, there’s no certainty that the product you’ll receive will have the same quality as the images you saw and read online.

So, with this extended warranty period, we hope that our confidence in this LED downlight will be reflected, providing you with more confidence and encouraging you to purchase! If you have any questions about this product, please call or email us.

Sleek Slimline Bezel with Brushed Chrome Finish

If you’re looking for a lighting fixture that can blend in with any decor and furniture pieces that you already have, this LED downlight is what you need! It has a sleek, slimline bezel with a lovely brushed chrome finish, which goes well with other design schemes, whether classic, vintage, modern, rustic, retro, and more.

Ceiling fixtures are difficult to change because of their location. If those lights are customised for a specific theme, it will require more effort whenever you want to change your aesthetic. So, instead, the best solution is to have this LED downlight as a neutral ceiling fixture and use customised lamps to add character to your rooms!

More Information
Average Life (Hours) 30,000
Downlight Type Fixed
Base GU10
Height 108mm
Choose LED Colour Cool White 6000K
Beam Angle 110°
Lumens 400
Diameter 85mm
Dimmable Non-Dimmable
Input Voltage 220-240v
Power 4.5w
Warranty 3 Years
IP Rating IP20
Cut Out Hole 65mm
Finish Brushed Chrome/Nickel
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2023 Simple Lighting. All Rights Reserved