Merrytek Remote Control MH10 - For High Bay Light With Microwave Sensor
- Full Remote Control – Adjust on/off, dimming, and sensor modes without climbing a ladder
- Simple Setup – No wiring needed. Works instantly with compatible high bay sensors
- Custom Brightness Levels – Choose 100%, 50%, or 10% lighting to suit your space and save energy
- Adjustable Standby Dimming – Set how dim the lights go when idle—ideal for cutting costs
- Flexible Detection Zones – Control coverage area from 25% to 100% to match your layout
- Programmable Hold Times – Keep lights on for 5 seconds to 30 minutes, depending on your workflow
- Standby Time Control – Delay dimming from 0 to 30 minutes—no sudden blackouts mid-task
- Compact with Long Range – Small enough to pocket, strong enough to control lights from 15 metres away
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Full Remote Control for Your High Bay Sensor
Ever wanted to feel like a lighting overlord? The remote gives you full command over your high bay LED lights. No stepladder required!
From the ground (or swivel chair), you can turn your lights on and off, brighten or dim them dramatically, or switch sensor modes like a total boss.
Tired of waving your arms around, hoping the high bay lights notice you? With this remote, you control them instead of the other way round. They’ll finally listen to your every whim.
Whether you’re adjusting for work hours or trying to avoid blinding glare during lunch, this remote does it all—with zero backchat. Want the convenience and flexibility? This remote is the answer.
Simple Setup for Instant Use
You know what’s also great? Products that don’t treat you like an unpaid IT intern. And thankfully, this one doesn’t need an engineer or a prayer circle to get going.
This remote is designed to work straight out of the box with Simple Lighting’s microwave sensor high bays. No complicated wiring diagrams required. And definitely no crying involved.
Simply connect this remote to the lights and you’re good to go. That’s it! You don’t even need an instruction manual written in twelve languages. Just a working thumb and a little common sense will do.
If only more things in life were this simple—like assembling furniture or figuring out which bin day it is.
Adjustable Brightness & Standby Settings
Some days call for full brightness. Others, though, need a soft glow that says “I’m here, but only just.” With this remote, you can enjoy both!
This product lets you set your high bay light’s brightness to 100%, 50%, or 10%. Choose which setting you like based on tasks, time of day, or sheer moodiness.
It also lets you customise the standby dimming level. That means the lights can chill a little without completely ghosting the room.
Additionally, wasting energy is no longer in fashion; everyone’s into renewable energy these days. This remote will help you keep up with the trend, saving power without turning your space into a cave.
Choose Detection Area & Sensitivity
Ever walked into a room to find the lights switched off, like they just didn’t care? With this remote, you’ll decide how much attention your lights pay you.
It lets you adjust your light’s detection area by 25%, 50%, 75%, or even 100%. Tailor the range to fit your space instead of putting up with some default setting from a factory in 2008.
What’s more, this remote also allows you to control the sensitivity. Don’t want the lights flicking on because a spider sneezed in the corner? Turn it down a few notches.
High bay lighting is all about balance. They shouldn’t be jumpier than a cat in a thunderstorm—or as lazy as one on a radiator.
Control Hold Time & Standby Periods
You know when lights shut off mid-task like they’ve had enough of you? That’s never happening with this remote. You’re in charge of the schedule now.
Choose how long lights stay on, be it just 5 seconds (for drama) or a good 30 minutes (for actual productivity). They’ll remain lit forever until you say otherwise!
This remote offers control standby delays, too! Anything from zero to 30 minutes, in fact. That’s especially handy if you need a bit of buffer before everything goes dim and sad.
Say goodbye to frantic hand-waving to keep the lights on. With a remote that respects your time (and doesn’t abandon you halfway through a job), you’ll live a little easier.
Compact Design, Long Remote Distance
The remote control might look small, but it packs quite a punch. With infrared transmission reaching up to 15 metres, it’s basically shouting instructions from across the warehouse—with precision.
No more awkward pointing, doing wrist yoga or getting annoyed because it doesn't do what it's supposed to. This remote works vertically, horizontally, diagonally—probably even upside-down if you’re feeling a bit dramatic.
It’s compact enough to hang on a lanyard, stash in your toolbox, or guard with your life (because yes, your team will probably keep trying to keep it to themselves).
No need to do silly bells and whistles. This remote will work exactly how you expect it to. For once, something simple actually stays simple.
| Length | 174mm |
|---|---|
| Width | 56mm |
| Height | 26mm |
| IP Rating | IP20 |
| Input Voltage | Battery (AAA) |
| Warranty | 3 Years |
For delivery or returns information, please refer to the page below.