Kinetic Switches

Kinetic switches give you wireless lighting control. Each press creates the energy you need to send a signal to a compatible receiver. It offers easy-to-use, battery-free control with no wiring required for installation. They're suitable for homes, commercial spaces, renovations and extensions.

At Simple Lighting, we have a wide collection of kinetic switches, receivers and complete kits. You'll also benefit from over 14,000 five-star reviews and free UK delivery if you order products worth over £75.

What Is a Kinetic Switch?

A kinetic switch is a self-powered wireless switch. It generates its own power when pressed. And it sends a wireless signal to a compatible receiver, which controls the light.

Unlike traditional wall switches, it doesn't need a battery, mains wiring running to the switch, or wall chasing to install new cables. That means less disruption and a quicker installation.

Each battery-free switch pairs with a compatible receiver. Once connected, it provides reliable wireless lighting control. It's up to you where to place the switch.

Kinetic switches are ideal for homes, offices, shops, extensions and renovation projects. They offer a simple way to add or relocate light switches without the time, mess and cost of conventional wiring.

How Kinetic Switches Work

Kinetic switches are simple. Every press generates a tiny amount of electricity from the switch's movement. The electricity, in turn, instantly powers a short 433MHz wireless radio signal.

During installation, the kinetic switch is paired with a compatible receiver. The receiver is designed to recognise the signal emitted by the switch. As the receiver is wired into your lighting circuit, it turns the connected light on or off whenever you press the switch.

Most kinetic switches have a wireless range of up to 20 metres indoors and more than 80 metres outdoors in open spaces. This gives you flexible control throughout your property.

And because the switch is completely wireless and battery-free, you can install it where it's most convenient. No more running new cables or replacing batteries.

Types of Kinetic Switches

There are several types of kinetic switches available. Each is made for specific installations, lighting layouts and control requirements.

1, 2 and 3 Gang Wireless Kinetic Switches

The gang refers to the number of independent switches on the faceplate. A 1-gang kinetic switch controls one lighting circuit, a 2-gang kinetic switch controls two, and so forth. Each gang is paired with its own compatible receiver, allowing every circuit to operate independently.

White is the standard finish across this range, with IP65 options available for bathrooms, utility rooms and other wet locations.

Kinetic Grid Switches

Kinetic grid switches are designed to fit standard UK grid plate systems. They're a popular choice for electricians and installers working on properties that already use grid switches. They operate exactly like standalone kinetic switches, generating power from each press and sending a wireless signal to a compatible receiver.

They're suitable for both residential and commercial projects, making it easy to add wireless control while maintaining a consistent look.

Kinetic Switch and Receiver Kits

Kinetic switch and receiver kits are the simplest way to start a wireless lighting installation. Each kit includes a 1-gang kinetic switch and a compatible non-dimmable 5A receiver, providing everything you need for a standard setup in one box.

The receiver is essential because the switch cannot control a light on its own. If you want smart features, Wi-Fi receiver kits offer app and voice control for even greater flexibility.

Where to Use Kinetic Switches

Kinetic switches help solve common installation challenges without adding batteries or running new switch wiring. This makes them suitable for a wide range of homes and commercial projects.

Kitchen and Living Spaces

Kinetic switches make it easy to add a switch where there isn't one already. They're also ideal for retrofitting two-way switching at the opposite end of a hallway, open-plan living space or large room without rewiring existing walls.

They can be mounted on smooth surfaces such as glass kitchen islands, giving you convenient control over your LED downlights, LED strips, and under-cabinet lights. The wireless design makes future changes just as simple.

Bathrooms and Wet Rooms

IP65-rated kinetic switches pair well with lighting for bathrooms, wet rooms and other areas exposed to moisture. They provide a practical alternative to traditional pull cords while keeping installation straightforward.

They're also ideal for adding a second control point near the entrance or beside a bathroom door. Because there's no wiring inside the switch, installation is quick and tidy.

Outdoor and Garden Lighting

Outdoor kinetic switches can be mounted onto glass, brick or timber surfaces without running additional switch cables. With a wireless range of up to 80 metres outdoors in open areas, they offer flexible control across your property.

They're ideal for outdoor lighting, gardens, sheds, summer houses, garages and outbuildings. You can add convenient switching without digging trenches or installing new cable runs.

Trade Use – Renovations and Retrofits

Kinetic switches are a popular choice for renovation and commercial lighting projects. They make two-way and three-way switching much easier by removing the need to chase walls or install extra switch wiring.

They're equally useful in listed buildings where preserving existing walls is important. They also help electricians respond quickly when customers decide to move a switch position after plastering is complete.

How to Choose a Kinetic Switch and Receiver

Choosing the right kinetic switch and receiver is easy. Focus on these four things before you buy.

1. Match the gang count to your lighting

Choose a 1-gang switch for one lighting circuit, a 2-gang switch for two, or a 3-gang switch for three. Each gang operates independently and requires its own compatible receiver.

2. Decide if you need dimming

If you only want to turn lights on and off, choose a non-dimmable receiver. If you want adjustable brightness, you'll need a separate dimmer or a dimmable kinetic switch paired with a compatible receiver.

3. Choose between RF and Wi-Fi control

An RF receiver provides reliable wireless control from your kinetic switch. A Wi-Fi receiver adds app and voice control but requires a permanent power supply and a 2.4 GHz network.

4. Check the receiver specification

Always choose a receiver with a maximum wattage higher than the total wattage of the connected bulbs. The receiver is installed near the light fitting or within the lighting circuit, while the kinetic wireless switch can be mounted wherever it's most convenient.

Installing a Kinetic Switch

Installing a kinetic switch is a simple two-stage process. The receiver requires wiring, but the switch itself does not.

1. Install the receiver

A qualified electrician should wire the receiver into the lighting circuit. This involves connecting the live, neutral and load to the light fitting.

Installing receivers also includes mains electrical work, and the project must comply with UK Part P Building Regulations. The unit should be placed near the light fitting or within the lighting circuit, not behind the switch.

2. Pair and mount the switch

Pairing is done by pressing the pairing button on the receiver and then pressing the kinetic switch. After this, the switch can be fixed in place using the supplied adhesive pad or mounted to a standard back box with screws. Because the kinetic switch is completely battery-free, it never needs wiring.

If you're looking for a wiring diagram or detailed installation guidance, please refer to the product manual or contact our team for assistance.

Why Buy Kinetic Switches from Simple Lighting

Simple Lighting has supplied quality lighting products across the UK since 2009. We stock a wide range of kinetic switches, receivers and complete kits. Everything is carefully selected for reliable performance and easy installation.

Buy with confidence from a retailer trusted by thousands of customers. We've earned more than 14,000 five-star reviews across Google, Trustpilot and Reviews.io. Orders above £75 are qualified for free UK delivery. Trade pricing is also available for electricians and contractors.

Need help before or after you buy? Our technical team can answer questions regarding pairing, compatibility, installation, and more. Just visit our website or call 0333 443 2465 for straightforward, expert advice.

Frequently Asked Questions

Do kinetic switches need batteries?

No, kinetic switches are completely battery-free. Each press of the switch generates a small amount of electricity from the movement itself, which instantly powers the wireless signal sent to the receiver. This means no batteries to replace and no running costs to worry about.

Do I need an electrician to install a kinetic switch?

Installing the receiver does require a qualified electrician, as it needs to be wired into your lighting circuit. However, the kinetic switch itself requires no wiring at all, so once the receiver is in place, you can position the switch wherever suits you without any further electrical work.

What is the difference between a dimmable and non-dimmable kinetic switch receiver?

A non-dimmable receiver simply turns your lights on or off, while a dimmable receiver lets you adjust the brightness level too. If you want dimming control, you will also need to make sure your light fittings and bulbs are compatible with dimming, otherwise a non-dimmable receiver is the simpler and more affordable choice.

Can kinetic switches work with Alexa or Google Home?

Some of the kinetic switch receivers available at Simple Lighting are WiFi-enabled and compatible with Alexa and Google Home. The Mini Kinetic Switch Receiver range includes both dimmable and non-dimmable WiFi options that support smart home voice control, giving you even more flexibility over how you manage your lighting.

How far can a kinetic switch signal reach?

Most kinetic switches have a wireless range of up to 20 metres indoors and over 80 metres in open outdoor spaces. Walls, ceilings and other obstructions can reduce the indoor range slightly, but for the vast majority of home and commercial installations this is more than sufficient.

What is a kinetic switch kit and is it a good option for beginners?

A kinetic switch kit bundles a switch and a compatible receiver together, so you know everything will work straight away without needing to match components yourself. Simple Lighting offers kits in both dimmable and non-dimmable versions, making them a great starting point if you are new to wireless lighting control.

Can I control multiple lights from one kinetic switch?

Yes, depending on the receiver you choose, a single kinetic switch can be set up to control multiple lights on the same circuit. If you want to control separate circuits independently, a 2-gang or 3-gang kinetic switch lets you manage each one from a single faceplate using individual switch buttons.

What is a kinetic mini FOB switch and when would I use one?

A kinetic mini FOB switch is a compact, handheld version of a kinetic switch that works in the same battery-free, wireless way. It is a handy option when you want portable control, for example if you need to operate lights from a desk, bedside table or any location where a wall-mounted switch would not be practical.