RGB LED Strip, IP65, 30 LEDs P/M 7.2w
- Using our remote control, select from hundreds of different LED colours.
- Cut To Measure - personalised to your requirements.
- We solder a 1m long wire onto the end of each LED Strip for you.
- Available in any length between 0.1m to 10m long (100mm to 10,000mm).
- 5 Year Warranty
- High Power LED Strip - Super Bright!
- Change the colour or dim the brightness through remote control, mains wall plate or through our APP & smart speaker (Sold Separately).
- Order online or call 0333 443 2465
If you want the opportunity to be creative with your lighting then this LED tape is perfect for you! It’s IP65 so suitable for use in any room of your home, even wet areas such as zone 1 of the bathroom, you can even install this LED tape outside! RGB colour changing lights like this are fantastic for areas where you would like to be able to change the mood and atmosphere, choosing between thousands of colours at the click of a button.
The tape features 30 high-quality individual LEDs per metre, that emit stunning rich colours. Using our range of controllers you can choose from the full RGB spectrum, select a beautiful colour changing sequences, choose to speed up or slow down the sequences, and dim the brightness of your lights.
We will cut this tape to your exact length requirements & attach a cable to one end for FREE so that your tape is ready for installation as soon as you receive it. This means you don’t have to buy more tape than you need. We are able to cut this LED tape in increments of 100mm so please round down to the nearest 100mm when you’re placing your order.
Main features of IP65 RGB Colour Changing LED Tape
- Full colour and dimming control – Make this light work perfectly with our range of easy to use remote & wall controllers.
- IP65 - Waterproof, suitable for wet or damp areas of your home such as outside & zone 1 of your bathroom.
- Commercial quality - 5-year warranty.
- Easy to conceal – Only 3mm deep with self-adhesive backing.
- Bespoke preparation service.
Technical Specifications
- 12v DC - Requires a LED driver to run.
- 7.2w watt power per metre.
- 120° beam angle.
- 30 LEDs per metre.
- Cuttable every 100mm.
To utilise your RGB Colour Changing Tape, you will need a 12v LED driver with the correct wattage to power your chosen length of tape, be sure to contact our team if you need any further advice on powering your RGB Colour Changing Tape.
Average Life (Hours) | 50,000 |
---|---|
LED Strip Type | RGB |
IP Rating | IP65 |
LED Colour | RGB (Colour Changing) |
Beam Angle | 120° |
Length | Max 10m |
Dimmable | Dimmable |
Input Voltage | 12v DC |
Power | 7.2w |
Cable Length | 1000mm |
Warranty | 5 Years |
Width | 12mm |
For delivery or returns information, please refer to the page below.