This 4 × 2.4m acoustic slat wall lighting kit includes 4 separate lights, a matching driver and remote control. All lights emit 2700K warm white for indoor decorative lighting.
What is included in this kit?
- 4 × 2.4m warm white LED neon lights in matte black.
- A 1m lead with bare red and black wires on each light.
- A suitable 24V DC LED driver for the supplied lights.
- Remote control.
The remote is included with this version. Plan any additional cable and installation materials around your own layout. Prefer a kit without a remote? See the 4 × 2.4m kit with driver.
Compare slat wall lighting options
Choose how many separate 2.4m lights you need, then select a kit with a driver or a kit with a driver and remote. Every option below is warm white (2700K) and designed for indoor slat wall lighting.
4 separate lights for your wall layout
Plan four separate lines of light across a larger slatted feature wall, with consistent colour and finish throughout. The supplied lengths add up to 9.6m before cutting; they are separate lights, not a continuous 9.6m strip. Browse the full acoustic panel lights and slat wall lighting kits range to compare quantities.
The matte black housing blends into darker grooves when switched off. When lit, its diffused cover gives a smooth glow without visible LED dots. Each full light produces 164 lumens with a CRI above 90, making it suitable for ambient feature lighting. Keep separate lighting for reading, working and general room illumination. This light stays warm white; it does not change colour.
Check the fit before ordering
Each light measures 13.8mm wide × 8.2mm high. Measure the clear width and depth of your panel grooves and plan the cable route. Panel sizes vary, so check the measurements rather than assuming compatibility with a particular brand. See the product dimension image in the gallery.
- Supplied length: 4 × 2.4m (9.6m total).
- Light input: 24V DC.
- Power: 26.4W per full light; 105.6W total light load.
- Light output: 164 lumens per full light.
- Colour temperature: warm white, 2700K.
- Lead: 1m per light, with bare red and black wires.
Indoor installation, power and cutting
The supplied driver is matched to the lights in this kit. The 105.6W figure is the total light load, not the driver's rated capacity. Do not connect the neon directly to mains electricity. Follow the supplied wiring and polarity instructions and use a qualified electrician for mains connections. Follow the included control instructions when connecting the kit. Keep the driver dry and accessible.
Each light can be shortened at the marked 50mm cutting points. Isolate the power before cutting and measure carefully. We supply the full lengths and do not cut them before dispatch. A removed off-cut cannot simply be plugged back in; reusing it would require a new connection.
The neon is IP67 when uncut, but this range is designed for indoor slat wall lighting. The included driver is IP20. Cutting opens the sealed end, so the original IP67 protection no longer applies at that cut. The neon's rating does not make the complete installation suitable for outdoors.
Need help planning the fit or connections? Contact Simple Lighting with your panel measurements, chosen light lengths and driver position.
