Brighten Up Your Christmas With 10% Off – Use Code XMAS10
0 items - £0.00

0151 375 92100333 443 2465Order & Advice line

Call
Basket

20w LED Non Corrosive 110v Site Light with emergency mode - Natural White 4100k

SKU: ND-WFLED220SE

110V Voltage
1900 Lumens Lumens
50,000 Hours Lifespan
20w Wattage
£70.39
Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
20w LED Non Corrosive 110v Site Light with emergency mode - Natural White 4100k
Product Description

LED 20W IP65 Non-Corrosive Site Lights In Yellow and Opal.

Supplied with plastic & stainless steel clips. Comes with a 3 year Warranty.

Specifications

  • 3 Year Warranty
  • 20W
  • Lumen Output 1900lm
  • Yellow and Opal Color
  • IP65 Rating
  • Life Expectancy of over 50,000 hours
  • Colour Temp 4100K
Specifications
  • Colour Natural White
  • SKU ND-WFLED220SE
  • Beam Angle 120 Refers to the degree of width in which the light illuminates from the source.
  • Width 130mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 110V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 665mm The physical length of the product
  • Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Diameter 92mm The measurement across the face of the light source. Normally in mm unless other stated.
  • Delivery Time Delivery Within 1-3 Days
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish Yellow The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • LED Colour Natural White The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lumens 1900 A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 20w The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • Colour Temperature 4100k Colour temperature in K

Be the first to ask us a question and we will reply as soon as possible.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information

X

Ask a question: