Free Delivery On Orders Above £75*

Digital, Pixel LED Strip Light, Chasing Effect - WS2811, 14.4w

SKU
STRIP-IP20-14.4W-RGB-DIGITAL
The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
Power (Wattage)
14w
Power (Wattage)
Average Life (Hours)
30,000
Average Life (Hours)
IP Rating
IP20
IP Rating
Beam Angle
120°
Beam Angle
In stock

Key Features

  • We will solder a 1m long cable to the end of each led strip
  • Cut to your dimensions, no waste. Either place your order online, entering your lengths in metres (like 0.55 or 4.85) or call/email us for help
  • Addressable LEDs: Every three LEDs on a WS2811 strip can be controlled separately.
  • Easy to Install: Digital LED Strips (Also known as pixel or WS2811 LED strips) are easy to install, as they come with adhesive backing that allows you to stick them to a surface.
  • Wide Range of Colours: Digital LED strips are capable of producing a wide range of colours.
  • Programmable: Digital LED strips can be programmed to create a variety of effects, including animations, colour fades, and more.
£7.92 £9.50 (£9.50 per metre) Was £13.99 Save £4.49
Up to 5 year guarantee on lightbulbs
Free delivery if order is over £75
Digital, Pixel LED Strip Light, Chasing Effect - WS2811, 14.4w
£7.92 £9.50 (£9.50 per metre) Was £13.99 Save £4.49
A grey banner with an image of a rainbow-coloured roll of LED strip light and the text that says Digital Pixel LED Strip with WS2811 Technology for Stunning Effects A grey banner with an image of a rainbow-coloured roll of LED strip light and the text that says Digital Pixel LED Strip with WS2811 Technology for Stunning Effects

Digital Pixel LED Strip with WS2811 Technology for Stunning Effects

How is this LED strip light better than your regular LED strips? Well, that’s because this strip boasts the power of the WS2811 technology. If you don’t know what it is, it’s the strip lighting innovation that allows you to control the LED nodes on the strip individually.

Now, that might sound simple (because it is), but it’s actually so much more amazing than it sounds. RGB strip lights can change the colour of the whole strip, right? Well, a WS2811 strip light can do the same thing, but the difference is that you can control every three LEDs on the strip separately. Which means three nodes can be blue, while the other three adjacent to them are green.

The WS2811 technology opens up a plethora of design options and colour combinations, allowing you to create stunning lighting effects.

Create Dynamic Chasing and Animated Lighting Patterns

“Addressable LEDs” is what you call the LED nodes in this WS2811 strip light. That’s because each of three LEDs on the strip can be controlled separately. You can bid goodbye to the RGB strobing lights that only change the glow of the whole strip to one colour.

Now, thanks to the WS2811 technology, you’re able to create stunning light animations. Think dynamic chasing lights, where the different coloured lights on the strip seem to be moving throughout the strip “chasing” each other in an unending loop. Of course, more animations are available depending on the strip you’re getting.

To complement this amazing feature, these WS2811 strip lights are backed with a 5-year warranty, giving you plenty of time to fully enjoy your orchestra made of light.

A grey banner with an image that shows a dim living room with warm glowing lamps on each side and a rainbow strip light lining the ceiling cove, along with the text Create Dynamic Chasing and Animated Lighting Patterns A grey banner with an image that shows a dim living room with warm glowing lamps on each side and a rainbow strip light lining the ceiling cove, along with the text Create Dynamic Chasing and Animated Lighting Patterns
A grey banner with an image of a rainbow-coloured LED strip light and a scissor about to cut it, along with the text that says Cut-to-Size LED Strips with Free Cable Soldering Service A grey banner with an image of a rainbow-coloured LED strip light and a scissor about to cut it, along with the text that says Cut-to-Size LED Strips with Free Cable Soldering Service

Cut-to-Size LED Strips with Free Cable Soldering Service

We don’t want you wasting excess strips (and money). That’s why with Simple Lighting, you can get your strip lights at your desired length with our cut-to-size offer. You read that right.

Now there’s no more cutting and throwing away precious strips. If you need four metres, you’ll get four metres. Nothing more, and, especially, nothing less. Plus, we’ll even solder a one-metre cable on each LED strip order, free of charge.

Take note that the strips run on a 12V DC input. You know what that means? You need a compatible LED driver. “Compatible” means it is also a 12V driver, and its max load fits your strip’s total wattage.

You can check out Simple Lighting’s range of LED Drivers here:

https://www.simplelighting.co.uk/led-strip-lights/led-drivers/ 

Easy Peel-and-Stick Installation with Flexible Design

A WS2811 strip light is your typical RGB strip light, but better. And since it’s still a strip light, it also has the flexibility and ease of installation that all LED strip lights share. All WS2811 strips come with adhesive backing, making them easy to stick on any surface.

For the best result, make sure to clean the area before installing the strips. You don’t want the adhesive backing to be compromised by dirt and dust.

The strip light is not only bright, but it also boasts a wide range of illumination with its 120-degree beam angle. This is perfect when combined with its flexibility, allowing you to design and brighten even the tight, dark corners that your typical light bulbs can’t reach.

A grey banner with an image of a close up of a rainbow-coloured LED strip light and the text Easy Peel-and-Stick Installation with Flexible Design A grey banner with an image of a close up of a rainbow-coloured LED strip light and the text Easy Peel-and-Stick Installation with Flexible Design
A grey banner with an image of a kid's room with shelves on both sides, a table, chairs, and a slide in the middle, and a rainbow-coloured strip light lining the ceiling, along with the text Bright and Energy-Efficient RGB Lighting for Creative Projects A grey banner with an image of a kid's room with shelves on both sides, a table, chairs, and a slide in the middle, and a rainbow-coloured strip light lining the ceiling, along with the text Bright and Energy-Efficient RGB Lighting for Creative Projects

Bright and Energy-Efficient RGB Lighting for Creative Projects

Energy efficiency is the game when it comes to LED lighting. This WS2811 strip light not only allows for a more creative lighting design with its unique colour combinations, but it also does so while being energy-efficient, consuming very little power at 14.4W per metre.

Plus, you can have a maximum continuous length of eight metres, so you can conveniently use this strip light on large-scale lighting projects. Just ensure that you have an LED driver with a maximum load of 115.2W. Adding an additional 20% of safety margin is also a good practice, so a 140W LED driver would be the best choice.

Imagine having a chasing, rainbow LED colour effect running all across your room every day without the worry of a high energy bill at the end of the month.

Compatible with Advanced LED Controllers for Full Customisation

If it isn’t obvious yet, this digital LED strip light can be programmed to create a variety of effects, including the widely used chasing lights, colour fades, and more. In other words, customisation with this light is limitless. You just need a little cooperation with your imagination. So don’t hold off on the creativity when using this LED strip light.

However, to customise this digital strip light fully, an advanced LED controller and receiver are required for each eight-metre stretch. Simple Lighting RGB remote control and receiver kit allows for smooth dimming, colour-changing, and memory function.

You can get the remote control kit and receiver module here:

https://www.simplelighting.co.uk/digital-led-remote-control-receiver-kit/

Extra receivers are also available:

https://www.simplelighting.co.uk/digital-led-strip-receiver-module/

A grey banner with an image of a dark room lit only by a red and blue LED strip light that's lining the ceiling along with the text Compatible with Advanced LED Controllers for Full Customisation A grey banner with an image of a dark room lit only by a red and blue LED strip light that's lining the ceiling along with the text Compatible with Advanced LED Controllers for Full Customisation
More Information
Average Life (Hours) 30,000
LED Strip Type RGB
IP Rating IP20
Choose LED Colour RGB (Colour Changing)
Beam Angle 120°
Dimmable Dimmable
Input Voltage 12v DC
Power (Wattage) 14w
Cable Length 1000mm
Warranty 5 Years
Width 12mm
Ask a question

For delivery or returns information, please refer to the page below.

Delivery Information

Returns Information

Copyright © 2009 - 2025 Simple Lighting. All Rights Reserved