0151 375 92100333 443 2465Order & Advice line

Microwave & Lux Sensor For LED Non Corrosive Fittings


220 - 240V AC Voltage
Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
Microwave & Lux Sensor For LED Non Corrosive Fittings
Product Description

Microwave & Lux Sensor For LED Non Corrosive Fittings.

The 1200W Microwave Sensor suitable for our LED Non-Corrosive Lighting range. Adjustable Light control 2-2000Lux.


  • 220-240V
  • 5.8GHz
  • 400W inductive, 800W Resistive
  • Detection Sensitivity 25% 50% 100%
  • Time Settings 5 Sec/1 Min/ 5Min/ 15Min/ 30Min
  • IP20
  • Sensor for Non Corrosive LED Fittings
  • Width 37mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 220 - 240V AC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 115mm The physical length of the product
  • Delivery Time Delivery Within 1-3 Days
  • IP Rating IP20 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Depth 25mm

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information

My Basket

You have no items in your shopping basket.