0151 375 92100333 443 2465Order & Advice line

Colour Temperature Adjustable LED Tape - Warm to Cool White 2200-7000K

SKU: SLGLEDCT

24V DC Voltage
960lms per metre Lumens
50,000 Hours Lifespan
9.6w P/M Wattage
£18.00 (£18.00 per metre)
£18.00 (£18.00 per metre)
Need specific cuts and lengths?
Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
Colour Temperature LED Strip
Product Description

One of our best selling products, providing an energy-efficient & stunning illumination around your home or business. LED Tape is versatile and flexible, making it a great lighting solution for almost anywhere including but not limited to Kitchens, Bathrooms, Living Rooms, Bars, Restaurants, Function Rooms and Hotels.

This LED tape gives you the best of both worlds where you can change the colour from warm white to cool white by using a simple remote control or wall controller. 

It provides a dazzling bright light that is extremely effective in areas where you want a clean, yet crisp look.

Why should you buy from us?

Simply tell us your measurements and we will cut this to your exact requirements here in the UK. This is a free service which we don’t charge for, we solder the cables on to the LED tape to give it a professional finish, so why do it yourself!

This product can be cut every 25mm, with a maximum length of 10m long, most other suppliers cannot offer this and only offer a maximum length of 5m.

When we cut our LED Tape, we also solder a 2m long power cable on the end, giving you plenty of flexibility during installation.

Key Features

  • Dimmable
  • 5 Year Warranty, it’s made to last.
  • Commercial grade LEDs and PCB.
  • Easy to conceal – Only around 2mm deep.
  • Save Money – Its ultra-energy efficient and runs at only 4.8w per metre, reducing your energy costs when compared against traditional fluorescent lighting.
  • High Brightness, around 960 lumens per metre of LED Strip

How do you control and power your LED Tape?

Simple! Use our straight forward remote control and receiver set. Click here to see this product.

You also need a LED Driver to power this product as it runs on 24v DC.

How do you select the correct LED driver?

It can seem rather complicated or daunting when presented with many LED Drivers to choose from, but if you follow this guide you should get it right every time.

Firstly, it's important to understand how many metres of LED tape will be on the LED Driver?

Also, it's important to understand that you may need more than one LED driver for the job.

But note that you can also have multiple strips of LED tape on one led driver.

Example: You want to put 3 metres of LED tape onto a LED driver, to calculate what LED Driver is needed you just multiply 3 metres by the wattage per metre which is 9.6w. So you will be using a total of 28.8w for 3 metres. Therefore choose the driver closest to this wattage and ensure that the LED driver is 24v.

Technical Specification

  • 24v DC
  • 960 lumens per metre
  • 9.6w per metre of LED tape.
  • Cool White to Warm White LED
  • 2200K to 7000K Colour Temperature
  • 120 Degree beam angle
  • 120 LED’s per metre – Cuttable every 25mm
  • 3m Self adhesive
  • 8mm wide PCB x 2mm thick
  • 10 metre max continuous working length
  • 5 Year Warranty
Specifications
  • SKU SLGLEDCT
  • Beam Angle 120° Refers to the degree of width in which the light illuminates from the source.
  • Width 8mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 24V DC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Way of Mounting Self-Adhesive Backing
  • Height 2mm The overall height of the product at the tallest point.
  • Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Delivery Time Available Next Day if Ordered Before 3pm
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • LED Colour Colour Tunable The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
  • IP Rating IP20 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lumens 960lms per metre A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 9.6w P/M The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • CRI >80 Stands for colour rendering index. This is a measure of the ability of the light source to reproduce colours of different objects positively comparing with an ideal or a natural light source.
  • Bulb included Yes

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information

My Basket Continue Shopping

You have no items in your shopping basket.

Continue Shopping