0 items - £0.00

0151 375 92100333 443 2465Order & Advice line


IP65 LED Tape - Natural White


12V Voltage
420lm Lumens
50,000 Hours Lifespan
4.8W per metre Wattage
£19.95 (£19.95 per metre)
£19.95 (£19.95 per metre)
Need specific cuts and lengths?
Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs

IP65 LED Tape - Natural White

Click to enlarge

Product Description

IP65 LED Tape - Natural White 4000K

Are you hunting for the perfect lighting solution for your commercial project? Choosing LED Tape with a waterproof IP rating gives you extra peace of mind when the application is going to be around the general public, especially if you are lighting a bar or café or somewhere prone to the occasional spillage!

This tape miraculously bends and squeezes into practically any space, and is IP65 rated for waterproof protection. Why not add the wow factor to a bathroom or toilet space in your home or business by adding this Natural White Tape behind mirrors or in coving?

Key Features

  • FREE Bespoke Cutting Service – We’re here to help you! We can cut your Tape to suit your specific requirements 
  • IP65 – If being waterproof is a consideration than this is the rating you need to look for. An IP rating of 65 means that our LED Tape is protected from both total dust ingress and low pressure water jets from any direction
  • Natural White – For a crisp, bright light that won’t to be too hard on the eyes, settle on Natural White. Cooler than Warm White but less clinical that Cool White
  • 5-year Warranty – Our Tape is built to last
  • Cut the Cost – Both homes and businesses can benefit from reducing their energy bills, perhaps the easiest way to do this is to switch to LED, this tapes allows you to light large areas for 1/12 of the cost of running just one standard 60w incandescent bulb

How do you control and power your LED Tape?

There are several ways.

  1. Basic Way – Simply switch off from the light switch on the wall or the plug socket. Use standard LED Drivers.
  2. Remote control – This allows you to switch is on/off and also dim/increase the brightness using our handy remote control. Use Standard LED Drivers.
  3. Traditional Dimming – Everyone’s seen it, buy using a dimmable LED Driver along with a normal wall dimmer (LED Compatible!). Use Dimmable LED Drivers.
  4. The super modern way – Using our frankly stunning glass fronted wall dimmer, this allows switching on/off, controlling the brightness up/down and 4 zone control, so 4 different areas or rooms from the one wall controller. Use Standard LED Drivers.

How Do You Select the Correct LED Driver?

It can seem rather daunting when presented with such a wide range of different LED Drivers, but if you follow our advice, you should get it right every time. Don’t forget, our team are on hand to help you with any queries, give us a call on 0333 443 2465.

Firstly, it’s important to understand how many metres of LED Tape will be connected to the LED Driver. Secondly, remember that you may need more than one LED Driver for the job, but also note that several strips of LED Tape can be connected to the same driver.

Example: You want to power three metres of LED Tape using an LED Driver. To calculate which LED Driver is needed, simply multiply three metres by the wattage per metre (in this case 4.8w), so you will be using a total of 14.4w for three metres. Therefore, choose the driver closest to this wattage.

Technical Specification

  • 12v DC
  • 420 Lumens
  • 4.8w per metre 
  • Natural White LED
  • 4000k Colour Temperature
  • IP65 Rated
  • 120° Beam Angle 
  • 60 LEDs per metre 
  • 3M Self Adhesive Strip 
  • 8mm wide PCB x 3mm thick 
  • 6 metres max continuous working length
  • 5 Year Warranty

Why Should You Buy from Us?

Our LED Tape is manufactured to the highest quality and when tested is up to 20% brighter than other leading market Tape. Simple Lighting LED Tape can be cut every 50mm, with a maximum continuous length of 6m, with no drop in brightness or LED colour intensity.

We also offer a bespoke measuring and cutting service. Simply tell us your measurements and we will cut to your specific requirements here in the UK.

When you choose this service, we also connect the cables right here in our UK HQ, giving you a professional finish. No need to do all the hard work yourself!

This service is offered free of charge to our customers, so call us today for more information 0333 443 2465.


  • Beam Angle 120° Refers to the degree of width in which the light illuminates from the source.
  • Width 8mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 12V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Way of Mounting Self-Adhesive Backing
  • Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Delivery Time Next Day if Ordered Before 3pm
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes (Using Other Equipment) Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • LED Colour Natural White The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lumens 420lm A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 4.8W per metre The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • Bulb included Yes
  • Number of Bulbs 60 LEDs per metre
  • Colour Temperature 4000K Colour temperature in K

Be the first to ask us a question and we will reply as soon as possible.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information


Ask a question: