0 items - £0.00

0151 375 92100333 443 2465Order & Advice line


Integral EvoFire IP65 Fire Rated Downlight with Insulation Guard


200 - 240V AC Voltage

Choose your product:

Need Help Choosing?

Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
Integral EvoFire IP65 Fire Rated Downlight with Insulation Guard
Product Description

The Integral EvoFire downlight features a super thin 1mm bezel that blends in almost seamlessly and convienant loop in, loop out wiring terminals. 

The safe and good-looking Evofire Fire Rated Downlight is a fitting for a GU10 or MR16 LED bulbs. The design of the Evofire is fully open, meaning your lamp is not enclosed inside a large metal can, which can trap some of the heat it generates and lower the lamps performance and life. Lamps installed in an Evofire run up to 10°C cooler than a typical can-style fire rated downlight from leading LED brands - this can extend the lifetime of your lamps.

Due to its steel construction, the Evofire is tough, it is however, also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, fitting almost completely flush with your ceiling with a high quality powder coating the downlight looks discreet and pleasing in any setting.

Featuring a built-in Insulation Guard which allows loft insulation to be safely laid on top of the downlight, while still maintaining air-flow around the lamp.
Supplied with GU10 holder.

Its IP65 rating means it is suitable for bathroom installations in Zone 1. 

We recommend that you use Integral's 5.3w LED GU10 Bulb with this fire rated downlight.

Technical Info

  • IP65 Rated
  • Evolutionary Fire Rated fitting designed by Integral LED
  • Developed in the UK - Patent Pending
  • Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
  • Ultra-thin 1mm 'blend-in' bezel
  • Easy to install
  • Type of Fitting Shower/IP65 Downlight
  • SKU ILDLFR70D003
  • Length 83mm The physical length of the product
  • Diameter 85mm The measurement across the face of the light source. Normally in mm unless other stated.
  • Cutout Size 70mm The size of the cutout required to install the light. This is normally measure in mm unless otherwise stated.
  • Voltage 200 - 240V AC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Delivery Time Available Next Day Delivery if Ordered Before 3pm
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lamp Base GU10 Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.

Be the first to ask us a question and we will reply as soon as possible.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information


Ask a question: