0 items - £0.00

0151 375 92100333 443 2465Order & Advice line


EvoFire Ultra Thin Bezel Fire Rated Downlight with GU10 Lamp Holder


200 - 240V AC Voltage

Choose your product:

Need Help Choosing?

warm white led

Warm White

Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.

natural white led

Natural White

Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.

cool white led

Cool White

Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.


Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs

EvoFire Ultra Thin Bezel Fire Rated Downlight with GU10 Lamp Holder

Click to enlarge

Product Description

The attreactive and safe Evofire Fire Rated Downlight is a fitting for a GU10 LED Lamp. The fully open design of the Evofire does not conceal your lamp inside a large metal can, which can trap some of the heat it generates, which in turn can lower the performance and lifetime of your lamp. Because lamps installed in an Evofire run at up to 10 °C cooler than a typical can-style fire rated downlight from leading LED brands - the lifetime of your lamps can be extended.

Thanks to its steel construction and high quality powder coating, the Evofire is tough, but is also a highly aesthetic choice for Fire Rated lighting. The 1mm blend-in bezel is up to 10 times thinner than typical IP65 rated downlights, and fits almost flush with your ceiling, so the downlight looks discreet and pleasing in any setting.

Supplied with GU10 holder.

  • Loop in and Loop out wiring terminals
  • Evolutionary Fire Rated fitting designed by Integral LED
  • Developed in the UK - Patent Pending
  • Fire Rating 30/60/90 minutes - Tested in UKAS Accredited Lab
  • Ultra-thin 1mm 'blend-in' bezel
  • Easy to install
  • SKU ILDLFR70D001
  • Length 39mm The physical length of the product
  • Diameter 85mm The measurement across the face of the light source. Normally in mm unless other stated.
  • Cutout Size 70mm The size of the cutout required to install the light. This is normally measure in mm unless otherwise stated.
  • Voltage 200 - 240V AC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Delivery Time Next Day Delivery if Ordered Before 3pm
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lamp Base GU10 Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.

Be the first to ask us a question and we will reply as soon as possible.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information


Ask a question: