Simple Lighting Co.
0151 375 92100333 443 2465Order & Advice line
- Product Description
- Specifications
- Reviews
- Delivery & Returns
5m RGB LED Tape Kit (Including LED Driver and Controller)
It couldn’t be easier to create stunning lighting in your home with our LED Tape kits, including 5m of our amazing RGB colour changing tape, as well as a 100w driver and a controller.
Our LED Tape allows you to simply install stunning illumination almost anywhere in your home. The tape is easy to install in even tricky areas as it is flexible and comes with a self-adhesive backing.
RGB Tape allows you to create beautiful lighting in any colour that suits you. You can change between glorious warm yellows, fresh greens and calming blues, and many more.
Choose between our standard tape and our IP65 waterproof rated tape for installation in bathrooms or outdoor areas.
This product provides excellent illumination, perfect for lighting up your kitchen, plinth and cove lighting, displays, cabinets, bars and restaurants.
What’s in the Box?
- 5m RGB LED Tape with 2m power cable (choose between our non-waterproof and IP65 waterproof rated tape)
- 100w LED Driver
- Remote Control and Receiver (see below for further information on the two available controllers)
Choose between two handy remote controls;
- Simple RF RGB Remote Control and Receiver – This remote gives you 8 colour options, as well as 6 pre-programmed colour changing modes and a dimmer and speed controller.
- Advanced RF RGB Remote Control – A touch screen remote control that gives you a choice of thousands of colours, 15 pre-programmed colour changing modes, dimming on static colour selection as well as some of the colour change sequences and a slow down/speed up control.
Why buy 5m RGB LED Tape Kit?
- Easy to get started – LED tape, driver and controller included
- Commercial grade – The product is made to last and has an extended 5 year warranty
- Easy to conceal – Only 3mm deep and will stick to almost any surface
- Super bright – 60 high quality LEDs per metre
- Take control – With the controller, you will have the option to change the colour of your lights, choose from colour changing sequences and dim your LED lights
- 5m length – perfect for larger sized tape applications
Technical Specification
- 24v DC
- 14.4 watt power per metre
- 1080 lumens per metre
- 120° beam angle
- 60 LEDs per metre. LEDs are spaced 3 per 50mm
- Cuttable every 50mm (3 LEDs)
- Maximum continuous length of 8 metres
- Uses branded 3m self-adhesive
- 100w LED driver
As we cut this product from a 20m reel, it is excluded from our usual return policy, as it is personalised to your personal requirements (please refer to our terms and conditions for more information).
-
SKU RGB60LED5M
-
Beam Angle 120° Refers to the degree of width in which the light illuminates from the source.
-
Width 12mm The width of the product. Normally measured in mm unless otherwise stated.
-
Voltage 24V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
-
Length 5m The physical length of the product
-
Way of Mounting Self-Adhesive Backing
-
Height 3mm The overall height of the product at the tallest point.
-
Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
-
Delivery Time Available Next Day if Ordered Before 3pm
-
Cable Length 2m
-
Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
-
Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
-
LED Colour Various The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
-
Lumens Red 60/ Green 120/ Blue 75 lumens per metre A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
-
Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
-
Wattage 14.4w per metre The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
-
CRI 80 Stands for colour rendering index. This is a measure of the ability of the light source to reproduce colours of different objects positively comparing with an ideal or a natural light source.
-
Number of Bulbs 60 LEDs per metre
For delivery or returns information, please refer to the page below.
You have no items in your shopping basket.
Continue Shopping