0 items - £0.00

0151 375 92100333 443 2465Order & Advice line

Call
Basket

5w, 500mm Rigid LED Strip - Touch Dimmable & Linkable - Neutral White

SKU: SLGLED500DIM

12V DC Voltage
Neutral White - 380lm Lumens
5W Wattage
What are Lumens?

Choose your product:

Need Help Choosing The Right White?

warm white led

Warm White

Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.

natural white led

Natural White

Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.

cool white led

Cool White

Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.

Close

£24.00

Out of Stock

Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs

5w, 500mm Rigid LED Strip - Touch Dimmable & Linkable - Neutral White

Click to enlarge

Product Description

5w, 500mm Linkable Touch Dimmable Rigid Bar - Neutral White 

Our extremely thin rigid LED strips are very low profile at only 8.7mm high. So very simple to conceal out of the way.

With each strip utilizing 72 high brightness LEDs, these rigid strips come in one size of 500mm. In neutral white they come with the fantastic ability to dim by just touching the strip.

The strips are linkable by butting them up against each other with a butt connector at £1.95 each.

One added benefit of this LED Strip is that if you have them in a run, you can switch on only the one you need. So you can have a run of 10 strips, but only have 1 out of the 10 on, helping to cut your electric bill.

Please note LED Drivers are required to power this LED product. Please see further down, for description of what is required.

Product Summary;

  • Length - 500mm LED Strip
  • LED Colour - Neutral White (4000K) 
  • 72 x LED'S
  • High Brightness SMD3528 Epistar LED's
  • 5 Watt Per LED Strip
  • 60 degree beam angle
  • Lumens, Neutral White - 380
  • Dimmable in 3 steps, low brightness, medium brightness, full brightness
  • Voltage - 12v DC
  • Conforms to CE & RoHS Standards
  • 8.7mm High x 25mm Wide

12v DC LED Driver Required. Please see guide below.

  • Maximum of 1 strips use, SLG7WAMP6
  • Maximum of 3 strips use, SLG15WAMP6
  • Maximum of 9 strips use, SLG48AMP6

What's in the box;

  • 2 x Metal mounting brackets, including screws

Specifications

  • Colour Neutral White
  • SKU SLGLED500DIM
  • Beam Angle 60° Refers to the degree of width in which the light illuminates from the source.
  • Width 25mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 12V DC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 500mm The physical length of the product
  • Height 87mm The overall height of the product at the tallest point.
  • Delivery Time Next Day if Ordered Before 3pm
  • Cable Length 1 metre joining cable
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish Brushed Aluminium The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • LED Colour Neutral White The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
  • Lumens Neutral White - 380lm A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Maximum Load 5W The maximum electrical load that the product is manufactured to accept. Normally measured in Watts or AMP. EG, if you have a product which is 150w and lights which are 50w each then 3 x 50w = 150w which is the maximum load.
  • Wattage 5W The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • CRI >80 Stands for colour rendering index. This is a measure of the ability of the light source to reproduce colours of different objects positively comparing with an ideal or a natural light source.
  • Bulb included Yes
  • Number of Bulbs 72 LEDs per strip
  • Colour Temperature 4000K Colour temperature in K

For frequently asked questions, please refer to the link below.

Help & FAQs

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information