Brighten Up Your Christmas With 10% Off – Use Code XMAS10
0 items - £0.00

0151 375 92100333 443 2465Order & Advice line


4m IP65 Waterproof LED Tape Kit - Cool White/Warm White


12V DC Voltage
360lms per metre Lumens
50,000 Hours Lifespan
4.8w per metre Wattage

Was £104.75

Special Price: £89.95

Save £14.80

Choose your product:

Need Help Choosing?

Was £104.75

Special Price: £89.95

Save £14.80

Free delivery if order is over £75
Up to 7 year guarantee on lightbulbs
4m IP65 Waterproof LED Tape Kit - Cool White/Warm White
Product Description

4m IP65 Waterproof LED Tape Kit – Cool White/Warm White (Including LED Driver)

Our 4m IP65 Waterproof LED Tape Kit is perfect for use almost anywhere in your home and garden. This waterproof tape offers the same quality lighting as a standard single colour LED strips, but is suitable for exposure to higher levels of moisture.

We stock two LED colours for this product, so you can choose the super-bright white LEDs or the softer, more traditional, warm white.

Our LED tape is easy to install as you simply peel away the self-adhesive backing and stick to required surface.

This product provides excellent illumination, perfect for lighting up practically any area of your home.

What’s in the Box?

  • 4m Single Colour LED Tape
  • 30w LED Driver

Why buy 4m IP65 Waterproof LED Tape Kit?

  • Easy to get started – LED tape and LED driver included
  • Commercial grade – The product is made to last and has an extended 5 year warranty
  • Easy to conceal – Only 3mm deep and will stick to almost any surface
  • Choice of colour – Choose from dazzling cool white and soft warm white
  • 4m – Perfect for moderately sized tape applications
  • IP65 Waterproof – Perfect for application in high moisture areas

How to house LED Tape

If you are planning an outdoor application, or installation that may expose the product to high levels of moisture, you may want to think about Waterproof Housing for your LED driver.

 Technical Specification

  • 12v DC
  • 4.8 watt power per metre
  • 120° beam angle
  • 60 LEDs per metre, cuttable every 100mm
  • Maximum continuous length of 8 metres
  • Uses branded 3m self-adhesive
  • 30w LED driver

As we cut this product from a 6m reel, it is excluded from our usual return policy, as it is personalised to your personal requirements (please refer to our terms and conditions for more information).

  • Beam Angle 120° Refers to the degree of width in which the light illuminates from the source.
  • Width 10mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 12V DC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 4m The physical length of the product
  • Way of Mounting Self Adhesive Backing
  • Height 5mm The overall height of the product at the tallest point.
  • Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Delivery Time Available Next Day if Ordered Before 3pm
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes (Using Other Equipment) Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • LED Colour Various The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lumens 360lms per metre A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 4.8w per metre The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • CRI 80 Stands for colour rendering index. This is a measure of the ability of the light source to reproduce colours of different objects positively comparing with an ideal or a natural light source.
  • Bulb included Yes
  • Colour Temperature 3000K or 6000K Colour temperature in K

Be the first to ask us a question and we will reply as soon as possible.

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information


Ask a question: