0 items - £0.00

0151 375 92100333 443 2465Order & Advice line

Call
Basket

2m IP65 Waterproof LED Tape Kit - Cool White/Warm White

SKU: IPLED2M

12V DC Voltage
340lms per metre Lumens
50,000 Hours Lifespan
4.8w per metre Wattage
What are Lumens?

Choose your product:

Need Help Choosing The Right White?

warm white led

Warm White

Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.

natural white led

Natural White

Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.

cool white led

Cool White

Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.

Close

£34.99

Next Day if Ordered Before 3pm

£34.99
Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs

2m IP65 Waterproof LED Tape Kit - Cool White/Warm White

Click to enlarge

Product Description

2m IP65 Waterproof LED Tape Kit – Cool White/Warm White (Including LED Driver)

Our 2m IP65 Waterproof LED Tape Kit is a great bargain, including 2 metres of our best-selling LED tape, as well as a 15w LED driver to power it.

We stock two LED colours for this product, so you can choose the super-bright white LEDs or the softer, more traditional, warm white.

Our LED tape is easy to install as you simply peel away the self-adhesive backing and stick to required surface.

This product provides excellent illumination, perfect for lighting up practically any area of your home.

What’s in the Box?

  • 2m Single Colour LED Tape
  • 15w LED Driver

Why buy 2m IP65 Waterproof LED Tape Kit?

  • Easy to get started – LED tape and LED driver included
  • Commercial grade – The product is made to last and has an extended 5 year warranty
  • Easy to conceal – Only 3mm deep and will stick to almost any surface
  • Choice of colour – Choose from dazzling cool white and soft warm white
  • 2m – Perfect for smaller sized tape applications
  • IP65 Waterproof – Perfect for application in high moisture areas

How to house LED Tape

If you are planning an outdoor application, or installation that may expose the product to high levels of moisture, you may want to think about Waterproof Housing for your LED driver.

 Technical Specification

  • 12v DC
  • 4.8 watt power per metre
  • 120° beam angle
  • 60 LEDs per metre, cuttable every 100mm
  • Maximum continuous length of 8 metres
  • Uses branded 3m self-adhesive
  • 15w LED driver

As we cut this product from a 6m reel, it is excluded from our usual return policy, as it is personalised to your personal requirements (please refer to our terms and conditions for more information).

Specifications

  • SKU IPLED2M
  • Beam Angle 120° Refers to the degree of width in which the light illuminates from the source.
  • Width 10mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 12V DC The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Length 2m The physical length of the product
  • Way of Mounting Self-Adhesive Backing
  • Height 5mm The overall height of the product at the tallest point.
  • Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Delivery Time Next Day if Ordered Before 3pm
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Finish White The overall visible finish of the product. Such as stainless steel, chrome, white etc.
  • Dimmable Yes (Using Other Equipment) Whether the brightness is dimmable or not. Some products are dimmable via specialist remote control systems we supply. Whereas some products are dimmable with mains voltage wall dimmer.
  • LED Colour Various The colour of light emitted from the light source. Such as Cool White, Warm White, Red etc
  • IP Rating IP65 Ingress protection rating. Classifies the degree of protection against water and dust.
  • Lumens 340lms per metre A measure to the brightness of a LED Light. Example being 320 lumens would be the equivalent in brightness to a old fashioned 50w Halogen spot light.
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 4.8w per metre The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.
  • CRI 80 Stands for colour rendering index. This is a measure of the ability of the light source to reproduce colours of different objects positively comparing with an ideal or a natural light source.
  • Bulb included Yes
  • Number of Bulbs 60 LEDs per metre

For frequently asked questions, please refer to the link below.

Help & FAQs

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information