0 items - £0.00

0151 375 92100333 443 2465Order & Advice line

Day 5 - Black friday sale
Call
Basket

1m Colour Changing RGB 30 LED Tape kit

SKU: RGB30LED1M

12V Voltage
50,000 Hours Lifespan
7.2 Watt Wattage
What are Lumens?

Choose your product:

Need Help Choosing The Right White?

warm white led

Warm White

Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.

natural white led

Natural White

Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.

cool white led

Cool White

Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.

Close

Was £34.99

Special Price: £32.99

Save £2.00

Next Day if Ordered Before 3pm

Was £34.99

Special Price: £32.99

Save £2.00

Free next day delivery if order is over £50
Up to 7 year guarantee on lightbulbs

1m Colour Changing RGB 30 LED Tape kit

Click to enlarge

Product Description

1M RGB LED Tape Kit, Including Transformer & Controller - 30 LED's Per Metre

What is LED Tape?

LED tape is a continuous strip of light. It is only 2-3mm thick with the flexibility of a metal tape measure. 

This is extremely bright, ultra high output colour changing LED Tape. Brilliant for use under kitchen cabinets, plinth lighting, displays, cabinets, coving, uplighting, bars, restaurants, shops and many more uses.

It uses 3M branded self adhesive so you simply peel and stick on. Cuttable to the nearest 100mm therefore very personalised and if the strip is slightly too long you can cut away any excess simply with scissors. Alternatively, we do custom make this product. So feel free to give us a call us on 0151 909 4956 or email us with your dimensions and we would be delighted to assist you. 

Our LED Tape will add something special to your property, it will create a beautiful mood and continuous linear light onto its application.

We have supplied this product to thousands of customers nationwide and are amongst the largest suppliers of this product in the UK.

we have included 1m RGB LED tape with 2m power cable, 30W LED driver and an RF remote control with receiver (with choice of colours).

Choice of two controllers:

  • Simple RF RGB Remote control (Order code SLGRGB). This gives you a choice of 8 colours, 6 pre-programmed colour changing settings, dimming on single colour and slow down/speed up the colour change.
  • Advanced RF RGB Remote Control (Order Code SLG2RGB). A touch screen remote control gives you a choice of thousands of colours, 15 pre-programmed colour changing settings, dimming on single colour and dimming on several of the pre-programmed settings also and slow down/speed up the colour change.

Major Benefits:

  1. You can cut to size every 100mm (10cm) by simply using a pair of scissors. 
  2. Uses the highest quality, high lumen Epistar branded LED's. An amazing 30 LED's on every metre, 7.2 Watt per metre. 
  3. Very easy to install, uses 3M branded self adhesive so simply peel and stick down .
  4. COMES WITH AN UNBEATABLE 5 YEAR WARRANTY.

We cut this product from 6m a reel, therefore it is personalised to your requirements and, as a result, excluded from our usual return policies (Please refer to our terms and conditions for more information).

Specifications

  • SKU RGB30LED1M
  • Width 12mm The width of the product. Normally measured in mm unless otherwise stated.
  • Voltage 12V The operating voltage of the product. 220-240v AC is UK mains voltage (What comes out of your plug sockets). So if the voltage shown is below 220v then you will more than likely need a transformer for the light to operate.
  • Height 3mm The overall height of the product at the tallest point.
  • Average Hours 50,000 Hours The average number of hours you would expect the light to run. N.B This is the manufacturers guild line, not a warranty period.
  • Delivery Time Next Day if Ordered Before 3pm
  • Cable Length 2m
  • Light Source LED The type of light, such as LED, CFL (Compact fluorescent), Halogen etc
  • Lamp Base Integrated LED Indicates the size of the electrical connection at the bottom of the light source. Such as screw or bayonet etc. If you are confused with what you require please feel free to contact us for us.
  • Wattage 7.2 Watt The total electrical power used of the light. A higher wattage no longer guarantee’s that the light is brighter. EG: there are LED products which are 5w which is equal in brightness to a 50w incandescent bulb.

For frequently asked questions, please refer to the link below.

Help & FAQs

For delivery or returns information, please refer to the page below. 

Delivery Information 

Returns Information