Wireless Remote & Receiver For Colour Changing LED Tape by SLG Lighting.

We do two types of remote controls to control our RGB LED Tapes.

Option One - Simple RGB Controller, Giving you a choice of 8 colours and 6 colour changing programmes.

Option Two - Advanced Touch Screen RGB Controller, Giving you a choice of thousands of colours and 15 colour changing programmes.

Option One Specification

Our simple remote control has a 15 metre wireless radio range & you can hide the receiver unit anywhere in the room. You do not need to point at the receiver to change the colour or programme.

It does 8 static colours, it will dim the brightness down on static colour. It also comes pre-programmed with 6 colour change programmes

Our remote control gives you excellent control over your lights, the maximum load for the receiver is 20m on our 30 led per metre strip and 10m on our 60 led per metre strip. In technical terms this is 144 watt.

For lengths above the maximum load you can use our RGB amplifier which will boost the signal. (Order Code SLGAMP)

Specification

• Colour Options; Red, Green, Blue, White, Orange, Yellow, Cyan, Purple
• Hold onto a single colour
• Fully Dim the brightness of single colour
• Auto Change, variable speed (You can control the speed)
• Fade between colours, variable speed (You can control the speed)
• Flash between colours, variable speed (You can control the speed)
• Jump between colours, variable speed (You can control the speed)
• Memory, It remembers the colour/setting you had switched on when you switch the power off and then back on.

Option Two Specification

Our new touch screen remote control is not only stylish but also extremely simple to use.

Using a very simple hand held touch screen remote control you simple move you fingers around the colour wheel or touch it to select from thousands of colours.

The remote control has a 20 metre wireless radio range & you can hide the receiver unit anywhere in the room. You do not need to point at the receiver to change the colour or programme.

The remote control does thousands of  static colours, it will dim the brightness down on static colour & on selected colour changing programmes. In total their are 15 colour changing programmes, activated with the touch of a button.

Our remote control lets you have complete control over your lights, the maximum load for the receiver is 20m on our 30 led per metre strip and 10m on our 60 led per metre strip.

For lengths above the maximum load you can use our RGB amplifier which will boost the signal. (Order Code SLGAMP)

Features

• Colour Options; Thousands, by using a simple touch screen wheel. Please see pictures either above or below.
• Hold onto a single colour
• Fully Dim the brightness of single colour
• Memory, It remembers the colour/setting you had switched on when you switch the power off and then back on.
• Auto Change, variable speed (You can control the speed)
• Fade between colours, variable speed (You can control the speed)
• Flash between colours, variable speed (You can control the speed)
• Jump between colours, variable speed (You can control the speed)
• Plus many more different programmes, 15 settings in total.

Technical info

• 6 Amp per channel, R, G, B In total 18 AMP
• 12v - 24v DC
• 144 Watt Maximum
• Touch Screen Remote Control
• Requires 3 x AAA Batterys (Not Supplied)
• Controller Dimensions L85mm x W65mm x H25mm
• Further Tech Data can be supplied on request.