What is LED Tape?

LED tape is a continuous strip of light up to a maximum of 6 Metres long. It is only 2-3mm thick with the flexibility of a metal tape measure. We supply LED Tape in White, Warm White, Blue, Red, Green or Colour Changing. This product listing is for Green LED. For other colours please click here or see the LED Tape Category to your left.

It uses 3M branded self adhesive so you simply peel and stick on. It's cuttable to the nearest 50mm therefore very personalised and we will cut to size for all of our customers free of charge if the order is over £30, therefore you only pay for what you need.

It is extremely bright, brilliant for use under kitchen cabinets, plinth lighting, displays, cabinets, coving, uplighting, bars, restuarants, shops and many more uses. Their really are too many uses to detail.

LED Tape will splash a beautiful continuous linear effect light onto its application.

We have supplied this product to thousands of customers nationwide and are among the largest suppliers of this product in the UK. We have also supplied this to ITV's 60 Minute Makeover, and some of the shop fitting companys in the UK.

Major Benefits;

#1) You can cut to size every 50mm (5cm) by simply using a pair of scissors. When you cut LED tape you need to solder the power cable to the strip (Product code TINPUT)
#2) Let us do the hard work and use of bespoke service, simply call us on 0800 334 5183 during working hours or email support@simplelighting.co.uk tell us your measurements and we will cut and solder the LED Tape for you at no extra cost. Alternatively please simply note on the order during checkout what size strip you need and we will do this for you.
#3) Low Voltage only 12 Volt. Only 8mm wide & 3mm deep.
#4) Uses the highest quality Epistar branded LED's. An amazing 60 LED's on every metre, 4.8 Watt per metre.
#5) Very easy to install, uses 3M branded self adhesive so simply peel and stick down
#6) Can be fully dimmed using our remote control dimmer or Wall Dimmer with Remote control. Order code for remote dimmer SLGDIM OR Order code for Wall Dimmer With Remote SLGDIMWR
#7) Average life line of the LED's of 50,000 hours. Therefore years upon years of continuous use. The product will probally outlast your installation whether it being a kitchen, house, bar or club.
#8) Comes with a 12 month warranty incase in the very unlikely event the product fails.

You will need a LED Driver to run this product. An LED driver is basically a transformer. Please see table below;

For every cut of LED tape, it is also recommended that your order a Input Lead. The Input lead (Item Code - TINPUT), is basically a 2 mtr power cable which allows you to simply plug each length of LED Tape back into the LED Driver. We can solder the LED Input lead to the cut of tape for you as part of our bespoke service or you can do this yourself, it is very straight forward to do and will take no longer than a couple of minutes.

You can only order LED Tape by the metre on our website, so if bespoke cuts are required please call us on 0800 334 5183 or email support@simplelighting.co.uk

As we cut this product from a 6mtr reel, it is excluded from our usual return policys. Therefore it is personalised to your person requirements. (Please refer to our terms and conditions for more information)