IP65 RGB Colour Changing LED Tape - 30 LED Per Metre - Waterproof - by SLG Lighting

What is LED Tape?

LED tape is a continuous strip of light up to a maximum of 6 Metres long. It is only 2-3mm thick with the flexibility of a metal tape measure.

The IP65 rated LED Tape dust proof and splashproof, therefore cleaning and maintenance is very easy, simply run a damp cloth across the strip.

The LED Tape can be used indoors & outdoors

It uses 3M branded self adhesive so you simply peel and stick on. It's cuttable to the nearest 100mm therefore very personalised and we will cut to size for all of our customers free of charge if the order is over £30, therefore you only pay for what you need.

It is extremely bright, ultra high output colour changing LED Tape. Brilliant for use under kitchen cabinets, plinth lighting, displays, cabinets, coving, uplighting, bars, restuarants, shops and many more uses. Their really are too many uses to detail.

Choice of three controllers. You can control our LED Tape by using one of our three controllers below;

1. Simple RF RGB Remote control (Order code SLGRGB). This gives you a choice of 8 colours, 6 pre-programmed colour changing settings, dimming on single colour and slow down/speed up the colour change.
2. Advanced RF RGB Remote Control (Order Code SLG2RGB). A touch screen remote control gives you a choice of thousands of colours, 15 pre-programmed colour changing settings, dimming on single colour and dimming on several of the pre-programmed settings also and slow down/speed up the colour change.
3. For a professional touch - DMX Wall Controller (Order Code SLGDMXWALL) . A wall mounted 3 gang controller, hundreds of colours, dimming on single colour & 10 pre-programmed settings including "sound to light"

Our LED Tape will add something special to your property, it will create a beautiful mood and continous linear light onto its application.

We have supplied this product to thousands of customers nationwide and are amongst the largest suppliers of this product in the UK.

Major Benefits;

#1) You can cut to size every 100mm (10cm) by simply using a pair of scissors.
#2) Let us do the hard work and use of bespoke service, simply call us on 0800 334 5183 during working hours or email support@simplelighting.co.uk tell us your measurements and we will cut and wire up for you.
#3) Low Voltage only 12 Volt. Only 12mm wide & 3mm deep.
#4) Uses the highest quality, high lumen Epistar branded LED's. An amazing 30 LED's on every metre, 7.2 Watt per metre.
#5) Very easy to install, uses 3M branded self adhesive so simply peel and stick down
#6) Use with our remote control and receiver pack (Item Code SLGRGB)
#7) Average life line of the LED's of 50,000 hours. Therefore years upon years of continuous use. The product will probably outlast your installation whether it being a kitchen, house, bar or club.
#8) Comes with a 12 month warranty incase in the very unlikely event the product fails.

You will need a LED Driver & Remote Contol Pack to run this product. An LED driver is basically a transformer. Please see table below;

For every cut of LED tape, you will need a 4 core input wire (Order code TINPUT). It is basically a 2 mtr power cable which allows you to simply wire each length of LED Tape back into the Receiver. We can solder the LED Input lead to the cut of tape for you as part of our bespoke service or you can do this yourself, it is very straight forward to do and will take no longer than a couple of minutes.

You can only order LED Tape by the metre on our website, so if bespoke cuts are required please call us on 0800 334 5183 or email support@simplelighting.co.uk

As we cut this product from a 6mtr reel, it is excluded from our usual return policys. Therefore it is personalised to your person requirements. (Please refer to our terms and conditions for more information)