What is LED Tape?

LED tape is a continuous strip of light up to a maximum of 6 Metres long. It is only 2-3mm thick with the flexibility of a metal tape measure.

It uses 3M branded self adhesive so you simply peel and stick on. It's cuttable to the nearest 100mm therefore very personalised and we will cut to size for all of our customers free of charge if the order is over £30, therefore you only pay for what you need.

For areas where an extra bit of power is needed. Our high output LED tape uses the latest in LED Technology to ensure of a high quality & high power LED light.

Extremely bright, perfect for many applications such as bars, clubs, household etc.

Our LED Tape will add something special to your property, it will create a beautiful mood and continous linear light onto its application.

We have supplied this product to thousands of customers nationwide and are amongst the largest suppliers of this product in the UK.

Major Benefits;

#1) You can cut to size every 50mm (5cm) by simply using a pair of scissors.
#2) Let us do the hard work and use of bespoke service, simply call us on 0800 334 5183 during working hours or email support@simplelighting.co.uk tell us your measurements and we will cut and wire up for you.
#3) Warm White LED, Low Voltage only 12 Volt. Only 12mm wide & 3mm deep.
#4) Uses the highest quality Epistar branded LED's. An amazing 60 LED's on every metre, 14.4 Watt per metre. TRI-LED is 3 LED's per chip therefore 180 LED's p/m.
#5) Very easy to install, uses 3M branded self adhesive so simply peel and stick down
#6) Can be fully dimmed using our remote control dimmer or Wall Dimmer with Remote control. Order code for remote dimmer SLGDIM OR Order code for Wall Dimmer With Remote SLGDIMWR
#7) Average life line of the LED's of 50,000 hours. Therefore years upon years of continuous use. The product will probably outlast your installation whether it being a kitchen, house, bar or club.
#8) Comes with a 12 month warranty incase in the very unlikely event the product fails.

You will need a LED Driver  to run this product. An LED driver is basically a transformer. Please see table below;

For every cut of LED tape, you will need a 2 core input wire (Order code TINPUT). It is basically a 2 mtr power cable which allows you to simply plug each length of LED Tape back into the Tranformer. We can solder the LED Input lead to the cut of tape for you as part of our bespoke service or you can do this yourself, it is very straight forward to do and will take no longer than a couple of minutes.

You can only order LED Tape by the metre on our website, so if bespoke cuts are required please call us on 0800 334 5183 or email support@simplelighting.co.uk

As we cut this product from a 6mtr reel, it is excluded from our usual return policys. Therefore it is personalised to your person requirements. (Please refer to our terms and conditions for more information)